1 of 1
SENATE DOCKET, NO. 1704 FILED ON: 1/19/2023
SENATE . . . . . . . . . . . . . . No. 538
The Commonwealth of Massachusetts
_________________
PRESENTED BY:
Susan L. Moran
_________________
To the Honorable Senate and House of Representatives of the Commonwealth of Massachusetts in General
Court assembled:
The undersigned legislators and/or citizens respectfully petition for the adoption of the accompanying bill:
An Act relative to clean lighting.
_______________
PETITION OF:
NAME:DISTRICT/ADDRESS :Susan L. MoranPlymouth and BarnstableThomas M. Stanley9th Middlesex2/8/2023Michael O. MooreSecond Worcester2/15/2023 1 of 6
SENATE DOCKET, NO. 1704 FILED ON: 1/19/2023
SENATE . . . . . . . . . . . . . . No. 538
By Ms. Moran, a petition (accompanied by bill, Senate, No. 538) of Susan L. Moran, Thomas M.
Stanley and Michael O. Moore for legislation relative to clean lighting. Environment and
Natural Resources.
The Commonwealth of Massachusetts
_______________
In the One Hundred and Ninety-Third General Court
(2023-2024)
_______________
An Act relative to clean lighting.
Be it enacted by the Senate and House of Representatives in General Court assembled, and by the authority
of the same, as follows:
1 SECTION 1. Section 2 of Chapter 21H of the General Laws, as appearing in the 2020
2Official Edition, is hereby amended by striking out the definition of “Mercury-added Lamp” and
3inserting in place thereof the following definitions:-
4 “Compact fluorescent lamp” means a compact low-pressure, mercury-containing,
5electric-discharge light source in which a fluorescent coating transforms some of the ultraviolet
6energy generated by the mercury discharge into visible light, and includes all of the following
7characteristics:
8 (i) One base (end cap) of any type, including, but not limited to, screw, bayonet, two pins,
9and four pins.
10 (ii) Integrally ballasted or non-integrally ballasted. 2 of 6
11 (iii) Light emission between a correlated color temperature of 1700K and 24000K and a
12Duv of +0.024 and -0.024 in the International Commission on Illumination (CIE) Uniform Color
13Space (CAM02-UCS).
14 (iv) All tube diameters and all tube lengths.
15 (v) All lamp sizes and shapes for directional and nondirectional installations, including,
16but not limited to, PL, spiral, twin tube, triple twin, 2D, U-bend, and circular.
17 “Linear fluorescent lamp” means a low-pressure, mercury-containing, electric-discharge
18light source in which a fluorescent coating transforms some of the ultraviolet energy generated
19by the mercury discharge into visible light, and includes all of the following characteristics:
20 (i) Two bases (end caps) of any type, including, but not limited to, single-pin, two-pin,
21and recessed double contact.
22 (ii) Light emission between a correlated color temperature of 1700K and 24000K and a
23Duv of +0.024 and -0.024 in the CIE CAM02-UCS.
24 (iii) All tube diameters, including, but not limited to, T5, T8, T10, and T12.
25 (iv) All tube lengths from 0.5 to 8.0 feet, inclusive.
26 (v) All lamp shapes, including, but not limited to, linear, U-bend, and circular.
27 SECTION 2. Section 6J of Chapter 21H of the General Laws, as so appearing, is hereby
28amended by striking out sections (d)(1) and (d)(2) in their entirety and inserting in place thereof
29the following:- 3 of 6
30 (d)(1) On and after January 1, 2024, no person shall offer for final sale or distribute in
31this state as a new manufactured product a screw or bayonet base type compact fluorescent lamp.
32 (d)(2) On and after January 1, 2025, no person shall offer for final sale or distribute in
33this state as a new manufactured product a pin-base type compact fluorescent lamp or a linear
34fluorescent lamp.
35 SECTION 3. Section 6J of Chapter 21H of the General Laws, as so appearing, is hereby
36further amended by adding the following sections:-
37 (k) Sections (d)(1) and (d)(2) do not apply to a lamp designed and marketed exclusively
38for image capture and projection, including:
39 (i)photocopying;
40 (ii)printing, directly or in preprocessing;
41 (iii)lithography;
42 (iv)film and video projection; and
43 (v)holography.
44 (l) Sections (d)(1) and (d)(2) do not apply to a lamp that has a high proportion of
45ultraviolet light emission and is one of the following:
46 (i) A lamp with high ultraviolet content that has ultraviolet power greater than two
47milliwatts per kilolumen (mW/klm). 4 of 6
48 (ii) A lamp for germicidal use, such as the destruction of DNA, that emits a peak
49radiation of approximately 253.7 nanometers.
50 (iii) A lamp designed and marketed exclusively for disinfection or fly trapping from
51which either the radiation power emitted between 250 and 315 nanometers represents at least 5
52percent of, or the radiation power emitted between 315 and 400 nanometers represents at least 20
53percent of, the total radiation power emitted between 250 and 800 nanometers.
54 (iv) A lamp designed and marketed exclusively for the generation of ozone where the
55primary purpose is to emit radiation at approximately 185.1 nanometers.
56 (v) A lamp designed and marketed exclusively for coral zooxanthellae symbiosis from
57which the radiation power emitted between 400 and 480 nanometers represents at least 40
58percent of the total radiation power emitted between 250 and 800 nanometers.
59 (vi) Any lamp designed and marketed exclusively for use in a sunlamp product, as
60defined in section 1040.20(b)(9) of subchapter J of title 21 of the Code of Federal Regulations, as
61in effect on the date of enactment of this Act.
62 (m) Sections (d)(1) and (d)(2) do not apply to a lamp designed and marketed exclusively
63for use in medical or veterinary diagnosis or treatment, or in a medical device.
64 (n) Sections (d)(1) and (d)(2) do not apply to a lamp designed and marketed exclusively
65for use in the manufacturing or quality control of pharmaceutical products.
66 (o) Sections (d)(1) and (d)(2) do not apply to a lamp designed and marketed exclusively
67for spectroscopy and photometric applications, such as UV-visible spectroscopy, molecular
68spectroscopy, atomic absorption spectroscopy, nondispersive infrared (NDIR), Fourier transform 5 of 6
69infrared (FTIR), medical analysis, ellipsometry, layer thickness measurement, process
70monitoring, or environmental monitoring.
71 (p) Sections (d)(1) and (d)(2) do not apply to a lamp used by academic and research
72institutions for conducting research projects and experiments.
73 (q) The department may cause periodic inspections to be made of distributors or retailers
74in order to determine compliance with (d)(1) and (d)(2). The department shall investigate
75complaints received concerning violations of (d)(1) and (d)(2).
76 (r) If the department finds that any person has committed a violation of any provision of
77(d)(1) or (d)(2), the department shall issue a warning to such person. Any person who commits a
78violation after the issuance of such warning shall be subject to a civil penalty, issued by the
79department, of up to one hundred dollars for each offense. Any further violations committed by
80such person after this second violation shall be subject to a civil penalty of not more than five
81hundred dollars for each offense. Each lamp offered, sold, or distributed in violation of (d)(1) or
82(d)(2), each violation shall constitute a separate offense, and each day that such violation occurs
83shall constitute a separate offense.
84 (s) If the department finds repeated violations have occurred, it shall report the results of
85such violations to the Attorney General. The Attorney General may institute proceedings to seek
86an injunction in state court to enforce the provisions of (d)(1) or (d)(2).
87 (t) The department may adopt such further regulations as necessary to ensure the proper
88implementation and enforcement of the provisions of (d)(1) and (d)(2). 6 of 6
89 SECTION 4. The department of energy resources shall consult with the department of
90public utilities, the administrators of energy efficiency programs established under section 19 of
91chapter 25, and municipal lighting plants to offer incentives and rebates to offset the costs for
92converting to high-efficiency lighting technologies for eligible homeowners. Eligible
93homeowners shall include any homeowner in the commonwealth that:
94 (a) resides in a house or apartment or other unit of housing built over 50 years before the
95current date; and
96 (b) resides in a home with light ballasts incompatible with non-mercury containing light
97bulbs or lamps.