Amended IN Senate June 18, 2018 Amended IN Assembly April 12, 2018 Amended IN Assembly April 03, 2018 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION Assembly Bill No. 1857Introduced by Assembly Member Nazarian(Coauthor: Assembly Member Chiu)January 10, 2018 An act to add Section 18941.11 to the Health and Safety Code, relating to building standards. LEGISLATIVE COUNSEL'S DIGESTAB 1857, as amended, Nazarian. Building codes: earthquake safety: immediate occupancy standard.The California Building Standards Law provides for the adoption of building standards by state agencies by requiring all state agencies that adopt or propose adoption of any building standard to submit the building standard to the California Building Standards Commission (commission) for approval and adoption.This bill would require the commission to assemble a functional recovery working group comprised of certain state entities and members of the construction and insurance industries, as specified. The bill would require the working group, by July 1, 2020, 2022, to investigate and determine criteria for consider whether a functional recovery standard following a seismic event, is warranted for all or some building occupancy classifications and to direct the commission investigate the practical means of implementing that standard, as specified. The bill would require the working group to advise the appropriate state agencies to propose the appropriate building standards, as specified. The If it is determined that a functional recovery standard is not warranted, the bill would require the commission to produce working group to assist with development of a document providing guidance to, among others, building owners and local jurisdictions regarding function recovery after a seismic event, in the event that new building standards are not in place by January 1, 2023, as specified. The bill would authorize the commission to issue regulations based upon the recommendations from the working group. The bill would define functional recovery for purposes of these provisions. as specified.Digest Key Vote: MAJORITY Appropriation: NO Fiscal Committee: YES Local Program: NO Bill TextThe people of the State of California do enact as follows:SECTION 1. Section 18941.11 is added to the Health and Safety Code, to read:18941.11. (a) The Building Standards Commission shall assemble a functional recovery working group comprised of appropriate public and private sector entities, including, but not limited to:(1) The Department of Housing and Community Development. (2) The Division of the State Architect.(3) The Office of the State Fire Marshal.(4) The Structural Engineers Association of California.(5) California building officials.(6) The insurance industry. (7) The Building Owners and Managers Association.(8) Members of the construction industry.(9) The Earthquake Engineering Research Institute.(10) The California Council of the American Institute of Architects.(11) The Association of Bay Area Governments.(12) The Southern California Association of Governments.(13) The American Society of Civil Engineers.(14) The Los Angeles Economic Development Council or an economic development organization representing a metropolitan region in the state.(15) The Alfred E. Alquist Seismic Safety Commission.(16) The California Geological Survey.(17) The International Code Council.(b) Not later than July 1, 2020, 2022, the functional recovery working group shall do both all of the following: (1)Investigate and determine criteria for a functional recovery standard for all or some building occupancy classifications, and investigate and determine practical means of implementing that standard, as mandatory building code provisions. This shall be done for each of the seismic design categories applicable to the state.(1) Consider if a functional recovery standard is warranted for all or some building occupancy classifications, and investigate the practical means of implementing that standard either as a mandate or as a voluntary measure. If the working group suggests the development of a voluntary or mandatory standard is warranted, the working group shall assist in the preparation of an estimated cost of compliance for use by the appropriate state agencies in meeting the requirements of clause (i) of subparagraph (B) of paragraph (5) of subdivision (b) of Section 11346.2 Government Code.(2) Provide advice to the appropriate state agencies regarding whether the work product of paragraph (1) should apply only to certain specified seismic design categories or to the entire state. (2)(3) Subsequent to development of the building code provisions pursuant to paragraph (1), the working group shall direct the commission advise the appropriate state agencies to propose the appropriate building standards for consideration by the commission during the next regularly scheduled Triennial Adoption Cycle occurring after January 1, 2020. Cycle.(c) If the mandatory building code provisions under subdivision (b) are not completed in time for inclusion with the California Building Standards Code, effective January 1, 2023, the commission shall produce a guidance document it is determined that a functional recovery standard is not warranted, the group shall assist with the development of the guidance document for use by architects, building owners, engineers, insurance companies, and local jurisdictions that would provide a higher level of structural strength in new construction with the goal of enabling functional recovery after a significant seismic event. The commission is authorized to take the steps necessary to produce and distribute this document to interested parties via its Internet Web site and other venues.(d) The commission is authorized to adopt regulations based upon the recommendations resulting from the working group for nonresidential occupancies. These regulations shall comply with the requirements of the Administrative Procedures Act, Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 2 of Title 2 of the Government Code.(e) For purposes of this section, functional recovery standard means a set of enforceable building code provisions and regulations that provide specific design and construction requirements intended to result in a building for which postearthquake structural and nonstructural capacity are maintained or can be restored to support the basic intended functions of the buildings preearthquake use and occupancy within a maximum acceptable time, where the maximum acceptable time might differ for various uses or occupancies.
Amended IN Senate June 18, 2018 Amended IN Assembly April 12, 2018 Amended IN Assembly April 03, 2018 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION Assembly Bill No. 1857Introduced by Assembly Member Nazarian(Coauthor: Assembly Member Chiu)January 10, 2018 An act to add Section 18941.11 to the Health and Safety Code, relating to building standards. LEGISLATIVE COUNSEL'S DIGESTAB 1857, as amended, Nazarian. Building codes: earthquake safety: immediate occupancy standard.The California Building Standards Law provides for the adoption of building standards by state agencies by requiring all state agencies that adopt or propose adoption of any building standard to submit the building standard to the California Building Standards Commission (commission) for approval and adoption.This bill would require the commission to assemble a functional recovery working group comprised of certain state entities and members of the construction and insurance industries, as specified. The bill would require the working group, by July 1, 2020, 2022, to investigate and determine criteria for consider whether a functional recovery standard following a seismic event, is warranted for all or some building occupancy classifications and to direct the commission investigate the practical means of implementing that standard, as specified. The bill would require the working group to advise the appropriate state agencies to propose the appropriate building standards, as specified. The If it is determined that a functional recovery standard is not warranted, the bill would require the commission to produce working group to assist with development of a document providing guidance to, among others, building owners and local jurisdictions regarding function recovery after a seismic event, in the event that new building standards are not in place by January 1, 2023, as specified. The bill would authorize the commission to issue regulations based upon the recommendations from the working group. The bill would define functional recovery for purposes of these provisions. as specified.Digest Key Vote: MAJORITY Appropriation: NO Fiscal Committee: YES Local Program: NO
Amended IN Senate June 18, 2018 Amended IN Assembly April 12, 2018 Amended IN Assembly April 03, 2018
Amended IN Senate June 18, 2018
Amended IN Assembly April 12, 2018
Amended IN Assembly April 03, 2018
CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION
Assembly Bill No. 1857
Introduced by Assembly Member Nazarian(Coauthor: Assembly Member Chiu)January 10, 2018
Introduced by Assembly Member Nazarian(Coauthor: Assembly Member Chiu)
January 10, 2018
An act to add Section 18941.11 to the Health and Safety Code, relating to building standards.
LEGISLATIVE COUNSEL'S DIGEST
## LEGISLATIVE COUNSEL'S DIGEST
AB 1857, as amended, Nazarian. Building codes: earthquake safety: immediate occupancy standard.
The California Building Standards Law provides for the adoption of building standards by state agencies by requiring all state agencies that adopt or propose adoption of any building standard to submit the building standard to the California Building Standards Commission (commission) for approval and adoption.This bill would require the commission to assemble a functional recovery working group comprised of certain state entities and members of the construction and insurance industries, as specified. The bill would require the working group, by July 1, 2020, 2022, to investigate and determine criteria for consider whether a functional recovery standard following a seismic event, is warranted for all or some building occupancy classifications and to direct the commission investigate the practical means of implementing that standard, as specified. The bill would require the working group to advise the appropriate state agencies to propose the appropriate building standards, as specified. The If it is determined that a functional recovery standard is not warranted, the bill would require the commission to produce working group to assist with development of a document providing guidance to, among others, building owners and local jurisdictions regarding function recovery after a seismic event, in the event that new building standards are not in place by January 1, 2023, as specified. The bill would authorize the commission to issue regulations based upon the recommendations from the working group. The bill would define functional recovery for purposes of these provisions. as specified.
The California Building Standards Law provides for the adoption of building standards by state agencies by requiring all state agencies that adopt or propose adoption of any building standard to submit the building standard to the California Building Standards Commission (commission) for approval and adoption.
This bill would require the commission to assemble a functional recovery working group comprised of certain state entities and members of the construction and insurance industries, as specified. The bill would require the working group, by July 1, 2020, 2022, to investigate and determine criteria for consider whether a functional recovery standard following a seismic event, is warranted for all or some building occupancy classifications and to direct the commission investigate the practical means of implementing that standard, as specified. The bill would require the working group to advise the appropriate state agencies to propose the appropriate building standards, as specified. The If it is determined that a functional recovery standard is not warranted, the bill would require the commission to produce working group to assist with development of a document providing guidance to, among others, building owners and local jurisdictions regarding function recovery after a seismic event, in the event that new building standards are not in place by January 1, 2023, as specified. The bill would authorize the commission to issue regulations based upon the recommendations from the working group. The bill would define functional recovery for purposes of these provisions. as specified.
## Digest Key
## Bill Text
The people of the State of California do enact as follows:SECTION 1. Section 18941.11 is added to the Health and Safety Code, to read:18941.11. (a) The Building Standards Commission shall assemble a functional recovery working group comprised of appropriate public and private sector entities, including, but not limited to:(1) The Department of Housing and Community Development. (2) The Division of the State Architect.(3) The Office of the State Fire Marshal.(4) The Structural Engineers Association of California.(5) California building officials.(6) The insurance industry. (7) The Building Owners and Managers Association.(8) Members of the construction industry.(9) The Earthquake Engineering Research Institute.(10) The California Council of the American Institute of Architects.(11) The Association of Bay Area Governments.(12) The Southern California Association of Governments.(13) The American Society of Civil Engineers.(14) The Los Angeles Economic Development Council or an economic development organization representing a metropolitan region in the state.(15) The Alfred E. Alquist Seismic Safety Commission.(16) The California Geological Survey.(17) The International Code Council.(b) Not later than July 1, 2020, 2022, the functional recovery working group shall do both all of the following: (1)Investigate and determine criteria for a functional recovery standard for all or some building occupancy classifications, and investigate and determine practical means of implementing that standard, as mandatory building code provisions. This shall be done for each of the seismic design categories applicable to the state.(1) Consider if a functional recovery standard is warranted for all or some building occupancy classifications, and investigate the practical means of implementing that standard either as a mandate or as a voluntary measure. If the working group suggests the development of a voluntary or mandatory standard is warranted, the working group shall assist in the preparation of an estimated cost of compliance for use by the appropriate state agencies in meeting the requirements of clause (i) of subparagraph (B) of paragraph (5) of subdivision (b) of Section 11346.2 Government Code.(2) Provide advice to the appropriate state agencies regarding whether the work product of paragraph (1) should apply only to certain specified seismic design categories or to the entire state. (2)(3) Subsequent to development of the building code provisions pursuant to paragraph (1), the working group shall direct the commission advise the appropriate state agencies to propose the appropriate building standards for consideration by the commission during the next regularly scheduled Triennial Adoption Cycle occurring after January 1, 2020. Cycle.(c) If the mandatory building code provisions under subdivision (b) are not completed in time for inclusion with the California Building Standards Code, effective January 1, 2023, the commission shall produce a guidance document it is determined that a functional recovery standard is not warranted, the group shall assist with the development of the guidance document for use by architects, building owners, engineers, insurance companies, and local jurisdictions that would provide a higher level of structural strength in new construction with the goal of enabling functional recovery after a significant seismic event. The commission is authorized to take the steps necessary to produce and distribute this document to interested parties via its Internet Web site and other venues.(d) The commission is authorized to adopt regulations based upon the recommendations resulting from the working group for nonresidential occupancies. These regulations shall comply with the requirements of the Administrative Procedures Act, Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 2 of Title 2 of the Government Code.(e) For purposes of this section, functional recovery standard means a set of enforceable building code provisions and regulations that provide specific design and construction requirements intended to result in a building for which postearthquake structural and nonstructural capacity are maintained or can be restored to support the basic intended functions of the buildings preearthquake use and occupancy within a maximum acceptable time, where the maximum acceptable time might differ for various uses or occupancies.
The people of the State of California do enact as follows:
## The people of the State of California do enact as follows:
SECTION 1. Section 18941.11 is added to the Health and Safety Code, to read:18941.11. (a) The Building Standards Commission shall assemble a functional recovery working group comprised of appropriate public and private sector entities, including, but not limited to:(1) The Department of Housing and Community Development. (2) The Division of the State Architect.(3) The Office of the State Fire Marshal.(4) The Structural Engineers Association of California.(5) California building officials.(6) The insurance industry. (7) The Building Owners and Managers Association.(8) Members of the construction industry.(9) The Earthquake Engineering Research Institute.(10) The California Council of the American Institute of Architects.(11) The Association of Bay Area Governments.(12) The Southern California Association of Governments.(13) The American Society of Civil Engineers.(14) The Los Angeles Economic Development Council or an economic development organization representing a metropolitan region in the state.(15) The Alfred E. Alquist Seismic Safety Commission.(16) The California Geological Survey.(17) The International Code Council.(b) Not later than July 1, 2020, 2022, the functional recovery working group shall do both all of the following: (1)Investigate and determine criteria for a functional recovery standard for all or some building occupancy classifications, and investigate and determine practical means of implementing that standard, as mandatory building code provisions. This shall be done for each of the seismic design categories applicable to the state.(1) Consider if a functional recovery standard is warranted for all or some building occupancy classifications, and investigate the practical means of implementing that standard either as a mandate or as a voluntary measure. If the working group suggests the development of a voluntary or mandatory standard is warranted, the working group shall assist in the preparation of an estimated cost of compliance for use by the appropriate state agencies in meeting the requirements of clause (i) of subparagraph (B) of paragraph (5) of subdivision (b) of Section 11346.2 Government Code.(2) Provide advice to the appropriate state agencies regarding whether the work product of paragraph (1) should apply only to certain specified seismic design categories or to the entire state. (2)(3) Subsequent to development of the building code provisions pursuant to paragraph (1), the working group shall direct the commission advise the appropriate state agencies to propose the appropriate building standards for consideration by the commission during the next regularly scheduled Triennial Adoption Cycle occurring after January 1, 2020. Cycle.(c) If the mandatory building code provisions under subdivision (b) are not completed in time for inclusion with the California Building Standards Code, effective January 1, 2023, the commission shall produce a guidance document it is determined that a functional recovery standard is not warranted, the group shall assist with the development of the guidance document for use by architects, building owners, engineers, insurance companies, and local jurisdictions that would provide a higher level of structural strength in new construction with the goal of enabling functional recovery after a significant seismic event. The commission is authorized to take the steps necessary to produce and distribute this document to interested parties via its Internet Web site and other venues.(d) The commission is authorized to adopt regulations based upon the recommendations resulting from the working group for nonresidential occupancies. These regulations shall comply with the requirements of the Administrative Procedures Act, Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 2 of Title 2 of the Government Code.(e) For purposes of this section, functional recovery standard means a set of enforceable building code provisions and regulations that provide specific design and construction requirements intended to result in a building for which postearthquake structural and nonstructural capacity are maintained or can be restored to support the basic intended functions of the buildings preearthquake use and occupancy within a maximum acceptable time, where the maximum acceptable time might differ for various uses or occupancies.
SECTION 1. Section 18941.11 is added to the Health and Safety Code, to read:
### SECTION 1.
18941.11. (a) The Building Standards Commission shall assemble a functional recovery working group comprised of appropriate public and private sector entities, including, but not limited to:(1) The Department of Housing and Community Development. (2) The Division of the State Architect.(3) The Office of the State Fire Marshal.(4) The Structural Engineers Association of California.(5) California building officials.(6) The insurance industry. (7) The Building Owners and Managers Association.(8) Members of the construction industry.(9) The Earthquake Engineering Research Institute.(10) The California Council of the American Institute of Architects.(11) The Association of Bay Area Governments.(12) The Southern California Association of Governments.(13) The American Society of Civil Engineers.(14) The Los Angeles Economic Development Council or an economic development organization representing a metropolitan region in the state.(15) The Alfred E. Alquist Seismic Safety Commission.(16) The California Geological Survey.(17) The International Code Council.(b) Not later than July 1, 2020, 2022, the functional recovery working group shall do both all of the following: (1)Investigate and determine criteria for a functional recovery standard for all or some building occupancy classifications, and investigate and determine practical means of implementing that standard, as mandatory building code provisions. This shall be done for each of the seismic design categories applicable to the state.(1) Consider if a functional recovery standard is warranted for all or some building occupancy classifications, and investigate the practical means of implementing that standard either as a mandate or as a voluntary measure. If the working group suggests the development of a voluntary or mandatory standard is warranted, the working group shall assist in the preparation of an estimated cost of compliance for use by the appropriate state agencies in meeting the requirements of clause (i) of subparagraph (B) of paragraph (5) of subdivision (b) of Section 11346.2 Government Code.(2) Provide advice to the appropriate state agencies regarding whether the work product of paragraph (1) should apply only to certain specified seismic design categories or to the entire state. (2)(3) Subsequent to development of the building code provisions pursuant to paragraph (1), the working group shall direct the commission advise the appropriate state agencies to propose the appropriate building standards for consideration by the commission during the next regularly scheduled Triennial Adoption Cycle occurring after January 1, 2020. Cycle.(c) If the mandatory building code provisions under subdivision (b) are not completed in time for inclusion with the California Building Standards Code, effective January 1, 2023, the commission shall produce a guidance document it is determined that a functional recovery standard is not warranted, the group shall assist with the development of the guidance document for use by architects, building owners, engineers, insurance companies, and local jurisdictions that would provide a higher level of structural strength in new construction with the goal of enabling functional recovery after a significant seismic event. The commission is authorized to take the steps necessary to produce and distribute this document to interested parties via its Internet Web site and other venues.(d) The commission is authorized to adopt regulations based upon the recommendations resulting from the working group for nonresidential occupancies. These regulations shall comply with the requirements of the Administrative Procedures Act, Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 2 of Title 2 of the Government Code.(e) For purposes of this section, functional recovery standard means a set of enforceable building code provisions and regulations that provide specific design and construction requirements intended to result in a building for which postearthquake structural and nonstructural capacity are maintained or can be restored to support the basic intended functions of the buildings preearthquake use and occupancy within a maximum acceptable time, where the maximum acceptable time might differ for various uses or occupancies.
18941.11. (a) The Building Standards Commission shall assemble a functional recovery working group comprised of appropriate public and private sector entities, including, but not limited to:(1) The Department of Housing and Community Development. (2) The Division of the State Architect.(3) The Office of the State Fire Marshal.(4) The Structural Engineers Association of California.(5) California building officials.(6) The insurance industry. (7) The Building Owners and Managers Association.(8) Members of the construction industry.(9) The Earthquake Engineering Research Institute.(10) The California Council of the American Institute of Architects.(11) The Association of Bay Area Governments.(12) The Southern California Association of Governments.(13) The American Society of Civil Engineers.(14) The Los Angeles Economic Development Council or an economic development organization representing a metropolitan region in the state.(15) The Alfred E. Alquist Seismic Safety Commission.(16) The California Geological Survey.(17) The International Code Council.(b) Not later than July 1, 2020, 2022, the functional recovery working group shall do both all of the following: (1)Investigate and determine criteria for a functional recovery standard for all or some building occupancy classifications, and investigate and determine practical means of implementing that standard, as mandatory building code provisions. This shall be done for each of the seismic design categories applicable to the state.(1) Consider if a functional recovery standard is warranted for all or some building occupancy classifications, and investigate the practical means of implementing that standard either as a mandate or as a voluntary measure. If the working group suggests the development of a voluntary or mandatory standard is warranted, the working group shall assist in the preparation of an estimated cost of compliance for use by the appropriate state agencies in meeting the requirements of clause (i) of subparagraph (B) of paragraph (5) of subdivision (b) of Section 11346.2 Government Code.(2) Provide advice to the appropriate state agencies regarding whether the work product of paragraph (1) should apply only to certain specified seismic design categories or to the entire state. (2)(3) Subsequent to development of the building code provisions pursuant to paragraph (1), the working group shall direct the commission advise the appropriate state agencies to propose the appropriate building standards for consideration by the commission during the next regularly scheduled Triennial Adoption Cycle occurring after January 1, 2020. Cycle.(c) If the mandatory building code provisions under subdivision (b) are not completed in time for inclusion with the California Building Standards Code, effective January 1, 2023, the commission shall produce a guidance document it is determined that a functional recovery standard is not warranted, the group shall assist with the development of the guidance document for use by architects, building owners, engineers, insurance companies, and local jurisdictions that would provide a higher level of structural strength in new construction with the goal of enabling functional recovery after a significant seismic event. The commission is authorized to take the steps necessary to produce and distribute this document to interested parties via its Internet Web site and other venues.(d) The commission is authorized to adopt regulations based upon the recommendations resulting from the working group for nonresidential occupancies. These regulations shall comply with the requirements of the Administrative Procedures Act, Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 2 of Title 2 of the Government Code.(e) For purposes of this section, functional recovery standard means a set of enforceable building code provisions and regulations that provide specific design and construction requirements intended to result in a building for which postearthquake structural and nonstructural capacity are maintained or can be restored to support the basic intended functions of the buildings preearthquake use and occupancy within a maximum acceptable time, where the maximum acceptable time might differ for various uses or occupancies.
18941.11. (a) The Building Standards Commission shall assemble a functional recovery working group comprised of appropriate public and private sector entities, including, but not limited to:(1) The Department of Housing and Community Development. (2) The Division of the State Architect.(3) The Office of the State Fire Marshal.(4) The Structural Engineers Association of California.(5) California building officials.(6) The insurance industry. (7) The Building Owners and Managers Association.(8) Members of the construction industry.(9) The Earthquake Engineering Research Institute.(10) The California Council of the American Institute of Architects.(11) The Association of Bay Area Governments.(12) The Southern California Association of Governments.(13) The American Society of Civil Engineers.(14) The Los Angeles Economic Development Council or an economic development organization representing a metropolitan region in the state.(15) The Alfred E. Alquist Seismic Safety Commission.(16) The California Geological Survey.(17) The International Code Council.(b) Not later than July 1, 2020, 2022, the functional recovery working group shall do both all of the following: (1)Investigate and determine criteria for a functional recovery standard for all or some building occupancy classifications, and investigate and determine practical means of implementing that standard, as mandatory building code provisions. This shall be done for each of the seismic design categories applicable to the state.(1) Consider if a functional recovery standard is warranted for all or some building occupancy classifications, and investigate the practical means of implementing that standard either as a mandate or as a voluntary measure. If the working group suggests the development of a voluntary or mandatory standard is warranted, the working group shall assist in the preparation of an estimated cost of compliance for use by the appropriate state agencies in meeting the requirements of clause (i) of subparagraph (B) of paragraph (5) of subdivision (b) of Section 11346.2 Government Code.(2) Provide advice to the appropriate state agencies regarding whether the work product of paragraph (1) should apply only to certain specified seismic design categories or to the entire state. (2)(3) Subsequent to development of the building code provisions pursuant to paragraph (1), the working group shall direct the commission advise the appropriate state agencies to propose the appropriate building standards for consideration by the commission during the next regularly scheduled Triennial Adoption Cycle occurring after January 1, 2020. Cycle.(c) If the mandatory building code provisions under subdivision (b) are not completed in time for inclusion with the California Building Standards Code, effective January 1, 2023, the commission shall produce a guidance document it is determined that a functional recovery standard is not warranted, the group shall assist with the development of the guidance document for use by architects, building owners, engineers, insurance companies, and local jurisdictions that would provide a higher level of structural strength in new construction with the goal of enabling functional recovery after a significant seismic event. The commission is authorized to take the steps necessary to produce and distribute this document to interested parties via its Internet Web site and other venues.(d) The commission is authorized to adopt regulations based upon the recommendations resulting from the working group for nonresidential occupancies. These regulations shall comply with the requirements of the Administrative Procedures Act, Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 2 of Title 2 of the Government Code.(e) For purposes of this section, functional recovery standard means a set of enforceable building code provisions and regulations that provide specific design and construction requirements intended to result in a building for which postearthquake structural and nonstructural capacity are maintained or can be restored to support the basic intended functions of the buildings preearthquake use and occupancy within a maximum acceptable time, where the maximum acceptable time might differ for various uses or occupancies.
18941.11. (a) The Building Standards Commission shall assemble a functional recovery working group comprised of appropriate public and private sector entities, including, but not limited to:
(1) The Department of Housing and Community Development.
(2) The Division of the State Architect.
(3) The Office of the State Fire Marshal.
(4) The Structural Engineers Association of California.
(5) California building officials.
(6) The insurance industry.
(7) The Building Owners and Managers Association.
(8) Members of the construction industry.
(9) The Earthquake Engineering Research Institute.
(10) The California Council of the American Institute of Architects.
(11) The Association of Bay Area Governments.
(12) The Southern California Association of Governments.
(13) The American Society of Civil Engineers.
(14) The Los Angeles Economic Development Council or an economic development organization representing a metropolitan region in the state.
(15) The Alfred E. Alquist Seismic Safety Commission.
(16) The California Geological Survey.
(17) The International Code Council.
(b) Not later than July 1, 2020, 2022, the functional recovery working group shall do both all of the following:
(1)Investigate and determine criteria for a functional recovery standard for all or some building occupancy classifications, and investigate and determine practical means of implementing that standard, as mandatory building code provisions. This shall be done for each of the seismic design categories applicable to the state.
(1) Consider if a functional recovery standard is warranted for all or some building occupancy classifications, and investigate the practical means of implementing that standard either as a mandate or as a voluntary measure. If the working group suggests the development of a voluntary or mandatory standard is warranted, the working group shall assist in the preparation of an estimated cost of compliance for use by the appropriate state agencies in meeting the requirements of clause (i) of subparagraph (B) of paragraph (5) of subdivision (b) of Section 11346.2 Government Code.
(2) Provide advice to the appropriate state agencies regarding whether the work product of paragraph (1) should apply only to certain specified seismic design categories or to the entire state.
(2)
(3) Subsequent to development of the building code provisions pursuant to paragraph (1), the working group shall direct the commission advise the appropriate state agencies to propose the appropriate building standards for consideration by the commission during the next regularly scheduled Triennial Adoption Cycle occurring after January 1, 2020. Cycle.
(c) If the mandatory building code provisions under subdivision (b) are not completed in time for inclusion with the California Building Standards Code, effective January 1, 2023, the commission shall produce a guidance document it is determined that a functional recovery standard is not warranted, the group shall assist with the development of the guidance document for use by architects, building owners, engineers, insurance companies, and local jurisdictions that would provide a higher level of structural strength in new construction with the goal of enabling functional recovery after a significant seismic event. The commission is authorized to take the steps necessary to produce and distribute this document to interested parties via its Internet Web site and other venues.
(d) The commission is authorized to adopt regulations based upon the recommendations resulting from the working group for nonresidential occupancies. These regulations shall comply with the requirements of the Administrative Procedures Act, Chapter 3.5 (commencing with Section 11340) of Part 1 of Division 2 of Title 2 of the Government Code.
(e) For purposes of this section, functional recovery standard means a set of enforceable building code provisions and regulations that provide specific design and construction requirements intended to result in a building for which postearthquake structural and nonstructural capacity are maintained or can be restored to support the basic intended functions of the buildings preearthquake use and occupancy within a maximum acceptable time, where the maximum acceptable time might differ for various uses or occupancies.