California 2017-2018 Regular Session

California Assembly Bill AB2401 Latest Draft

Bill / Introduced Version Filed 02/14/2018

                            CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION Assembly Bill No. 2401Introduced by Assembly Member FloraFebruary 14, 2018 An act to amend Section 2601 of the Public Contract Code, relating to public contracts. LEGISLATIVE COUNSEL'S DIGESTAB 2401, as introduced, Flora. Public contracts: skilled and trained workforce.Existing law authorizes a public entity to require a bidder, contractor, or other entity to use a skilled and trained workforce to complete a contract or project, and requires that the commitment to use a skilled and trained workforce be made in an enforceable agreement that meets specified requirements. Existing law defines several terms for the purposes of those provisions.This bill would make nonsubstantive changes to those definitions.Digest Key Vote: MAJORITY  Appropriation: NO  Fiscal Committee: NO  Local Program: NO Bill TextThe people of the State of California do enact as follows:SECTION 1. Section 2601 of the Public Contract Code is amended to read:2601. For purposes of this chapter:(a) Apprenticeable occupation means an occupation for which the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations had approved an apprenticeship program pursuant to Section 3075 of the Labor Code before January 1, 2014.(b) Chief means the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations.(c) Graduate of an apprenticeship program means either of the following:(1) An individual that has been issued a certificate of completion under the authority of the California Apprenticeship Council for completing an apprenticeship program approved by the chief pursuant to Section 3075 of the Labor Code.(2) An individual that has completed an apprenticeship program located outside California and approved for federal purposes pursuant to under the apprenticeship regulations adopted by the federal Secretary of Labor.(d) Skilled and trained workforce means a workforce that meets all of the following conditions:(1) All the workers performing work in an apprenticeable occupation in the building and construction trades are either skilled journeypersons or apprentices registered in an apprenticeship program approved by the chief.(2) (A) For work performed on or after January 1, 2017, at least 30 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the occupation of teamster.(B) For work performed on or after January 1, 2018, at least 40 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(C) For work performed on or after January 1, 2019, at least 50 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(D) For work performed on or after January 1, 2020, at least 60 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(3) For an apprenticeable occupation in which no apprenticeship program had been approved by the chief before January 1, 1995, up to one-half of the graduation percentage requirements of paragraph (2) may be satisfied by skilled journeypersons who commenced working in the apprenticeable occupation before the chiefs approval of an apprenticeship program for that occupation in the county in which the project is located.(4) The apprenticeship graduation percentage requirements of paragraph (2) are satisfied if, in a particular calendar month, either of the following is true:(A) At least the required percentage of the skilled journeypersons employed by the contractor or subcontractor to perform work on the contract or project meet the graduation percentage requirement.(B) For the hours of work performed by skilled journeypersons employed by the contractor or subcontractor on the contract or project, the percentage of hours performed by skilled journeypersons who met the graduation requirement is at least equal to the required graduation percentage.(5) The contractor or subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if, during the calendar month, the contractor or subcontractor employs skilled journeypersons to perform fewer than 10 hours of work on the contract or project.(6) A subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if both of the following requirements are met:(A) The subcontractor was not a listed subcontractor under Section 4104 or a substitute for a listed subcontractor.(B) The subcontract does not exceed one-half of 1 percent of the price of the prime contract.(e) Skilled journeyperson means a worker who either:(1) Graduated from an apprenticeship program for the applicable occupation that was approved by the chief or located outside California and approved for federal purposes pursuant under to the apprenticeship regulations adopted by the federal Secretary of Labor.(2) Has at least as many hours of on-the-job experience in the applicable occupation as would be required to graduate from an apprenticeship program for the applicable occupation that is approved by the chief.

 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION Assembly Bill No. 2401Introduced by Assembly Member FloraFebruary 14, 2018 An act to amend Section 2601 of the Public Contract Code, relating to public contracts. LEGISLATIVE COUNSEL'S DIGESTAB 2401, as introduced, Flora. Public contracts: skilled and trained workforce.Existing law authorizes a public entity to require a bidder, contractor, or other entity to use a skilled and trained workforce to complete a contract or project, and requires that the commitment to use a skilled and trained workforce be made in an enforceable agreement that meets specified requirements. Existing law defines several terms for the purposes of those provisions.This bill would make nonsubstantive changes to those definitions.Digest Key Vote: MAJORITY  Appropriation: NO  Fiscal Committee: NO  Local Program: NO 





 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION

Assembly Bill No. 2401

Introduced by Assembly Member FloraFebruary 14, 2018

Introduced by Assembly Member Flora
February 14, 2018

 An act to amend Section 2601 of the Public Contract Code, relating to public contracts. 

LEGISLATIVE COUNSEL'S DIGEST

## LEGISLATIVE COUNSEL'S DIGEST

AB 2401, as introduced, Flora. Public contracts: skilled and trained workforce.

Existing law authorizes a public entity to require a bidder, contractor, or other entity to use a skilled and trained workforce to complete a contract or project, and requires that the commitment to use a skilled and trained workforce be made in an enforceable agreement that meets specified requirements. Existing law defines several terms for the purposes of those provisions.This bill would make nonsubstantive changes to those definitions.

Existing law authorizes a public entity to require a bidder, contractor, or other entity to use a skilled and trained workforce to complete a contract or project, and requires that the commitment to use a skilled and trained workforce be made in an enforceable agreement that meets specified requirements. Existing law defines several terms for the purposes of those provisions.

This bill would make nonsubstantive changes to those definitions.

## Digest Key

## Bill Text

The people of the State of California do enact as follows:SECTION 1. Section 2601 of the Public Contract Code is amended to read:2601. For purposes of this chapter:(a) Apprenticeable occupation means an occupation for which the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations had approved an apprenticeship program pursuant to Section 3075 of the Labor Code before January 1, 2014.(b) Chief means the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations.(c) Graduate of an apprenticeship program means either of the following:(1) An individual that has been issued a certificate of completion under the authority of the California Apprenticeship Council for completing an apprenticeship program approved by the chief pursuant to Section 3075 of the Labor Code.(2) An individual that has completed an apprenticeship program located outside California and approved for federal purposes pursuant to under the apprenticeship regulations adopted by the federal Secretary of Labor.(d) Skilled and trained workforce means a workforce that meets all of the following conditions:(1) All the workers performing work in an apprenticeable occupation in the building and construction trades are either skilled journeypersons or apprentices registered in an apprenticeship program approved by the chief.(2) (A) For work performed on or after January 1, 2017, at least 30 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the occupation of teamster.(B) For work performed on or after January 1, 2018, at least 40 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(C) For work performed on or after January 1, 2019, at least 50 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(D) For work performed on or after January 1, 2020, at least 60 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(3) For an apprenticeable occupation in which no apprenticeship program had been approved by the chief before January 1, 1995, up to one-half of the graduation percentage requirements of paragraph (2) may be satisfied by skilled journeypersons who commenced working in the apprenticeable occupation before the chiefs approval of an apprenticeship program for that occupation in the county in which the project is located.(4) The apprenticeship graduation percentage requirements of paragraph (2) are satisfied if, in a particular calendar month, either of the following is true:(A) At least the required percentage of the skilled journeypersons employed by the contractor or subcontractor to perform work on the contract or project meet the graduation percentage requirement.(B) For the hours of work performed by skilled journeypersons employed by the contractor or subcontractor on the contract or project, the percentage of hours performed by skilled journeypersons who met the graduation requirement is at least equal to the required graduation percentage.(5) The contractor or subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if, during the calendar month, the contractor or subcontractor employs skilled journeypersons to perform fewer than 10 hours of work on the contract or project.(6) A subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if both of the following requirements are met:(A) The subcontractor was not a listed subcontractor under Section 4104 or a substitute for a listed subcontractor.(B) The subcontract does not exceed one-half of 1 percent of the price of the prime contract.(e) Skilled journeyperson means a worker who either:(1) Graduated from an apprenticeship program for the applicable occupation that was approved by the chief or located outside California and approved for federal purposes pursuant under to the apprenticeship regulations adopted by the federal Secretary of Labor.(2) Has at least as many hours of on-the-job experience in the applicable occupation as would be required to graduate from an apprenticeship program for the applicable occupation that is approved by the chief.

The people of the State of California do enact as follows:

## The people of the State of California do enact as follows:

SECTION 1. Section 2601 of the Public Contract Code is amended to read:2601. For purposes of this chapter:(a) Apprenticeable occupation means an occupation for which the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations had approved an apprenticeship program pursuant to Section 3075 of the Labor Code before January 1, 2014.(b) Chief means the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations.(c) Graduate of an apprenticeship program means either of the following:(1) An individual that has been issued a certificate of completion under the authority of the California Apprenticeship Council for completing an apprenticeship program approved by the chief pursuant to Section 3075 of the Labor Code.(2) An individual that has completed an apprenticeship program located outside California and approved for federal purposes pursuant to under the apprenticeship regulations adopted by the federal Secretary of Labor.(d) Skilled and trained workforce means a workforce that meets all of the following conditions:(1) All the workers performing work in an apprenticeable occupation in the building and construction trades are either skilled journeypersons or apprentices registered in an apprenticeship program approved by the chief.(2) (A) For work performed on or after January 1, 2017, at least 30 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the occupation of teamster.(B) For work performed on or after January 1, 2018, at least 40 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(C) For work performed on or after January 1, 2019, at least 50 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(D) For work performed on or after January 1, 2020, at least 60 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(3) For an apprenticeable occupation in which no apprenticeship program had been approved by the chief before January 1, 1995, up to one-half of the graduation percentage requirements of paragraph (2) may be satisfied by skilled journeypersons who commenced working in the apprenticeable occupation before the chiefs approval of an apprenticeship program for that occupation in the county in which the project is located.(4) The apprenticeship graduation percentage requirements of paragraph (2) are satisfied if, in a particular calendar month, either of the following is true:(A) At least the required percentage of the skilled journeypersons employed by the contractor or subcontractor to perform work on the contract or project meet the graduation percentage requirement.(B) For the hours of work performed by skilled journeypersons employed by the contractor or subcontractor on the contract or project, the percentage of hours performed by skilled journeypersons who met the graduation requirement is at least equal to the required graduation percentage.(5) The contractor or subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if, during the calendar month, the contractor or subcontractor employs skilled journeypersons to perform fewer than 10 hours of work on the contract or project.(6) A subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if both of the following requirements are met:(A) The subcontractor was not a listed subcontractor under Section 4104 or a substitute for a listed subcontractor.(B) The subcontract does not exceed one-half of 1 percent of the price of the prime contract.(e) Skilled journeyperson means a worker who either:(1) Graduated from an apprenticeship program for the applicable occupation that was approved by the chief or located outside California and approved for federal purposes pursuant under to the apprenticeship regulations adopted by the federal Secretary of Labor.(2) Has at least as many hours of on-the-job experience in the applicable occupation as would be required to graduate from an apprenticeship program for the applicable occupation that is approved by the chief.

SECTION 1. Section 2601 of the Public Contract Code is amended to read:

### SECTION 1.

2601. For purposes of this chapter:(a) Apprenticeable occupation means an occupation for which the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations had approved an apprenticeship program pursuant to Section 3075 of the Labor Code before January 1, 2014.(b) Chief means the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations.(c) Graduate of an apprenticeship program means either of the following:(1) An individual that has been issued a certificate of completion under the authority of the California Apprenticeship Council for completing an apprenticeship program approved by the chief pursuant to Section 3075 of the Labor Code.(2) An individual that has completed an apprenticeship program located outside California and approved for federal purposes pursuant to under the apprenticeship regulations adopted by the federal Secretary of Labor.(d) Skilled and trained workforce means a workforce that meets all of the following conditions:(1) All the workers performing work in an apprenticeable occupation in the building and construction trades are either skilled journeypersons or apprentices registered in an apprenticeship program approved by the chief.(2) (A) For work performed on or after January 1, 2017, at least 30 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the occupation of teamster.(B) For work performed on or after January 1, 2018, at least 40 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(C) For work performed on or after January 1, 2019, at least 50 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(D) For work performed on or after January 1, 2020, at least 60 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(3) For an apprenticeable occupation in which no apprenticeship program had been approved by the chief before January 1, 1995, up to one-half of the graduation percentage requirements of paragraph (2) may be satisfied by skilled journeypersons who commenced working in the apprenticeable occupation before the chiefs approval of an apprenticeship program for that occupation in the county in which the project is located.(4) The apprenticeship graduation percentage requirements of paragraph (2) are satisfied if, in a particular calendar month, either of the following is true:(A) At least the required percentage of the skilled journeypersons employed by the contractor or subcontractor to perform work on the contract or project meet the graduation percentage requirement.(B) For the hours of work performed by skilled journeypersons employed by the contractor or subcontractor on the contract or project, the percentage of hours performed by skilled journeypersons who met the graduation requirement is at least equal to the required graduation percentage.(5) The contractor or subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if, during the calendar month, the contractor or subcontractor employs skilled journeypersons to perform fewer than 10 hours of work on the contract or project.(6) A subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if both of the following requirements are met:(A) The subcontractor was not a listed subcontractor under Section 4104 or a substitute for a listed subcontractor.(B) The subcontract does not exceed one-half of 1 percent of the price of the prime contract.(e) Skilled journeyperson means a worker who either:(1) Graduated from an apprenticeship program for the applicable occupation that was approved by the chief or located outside California and approved for federal purposes pursuant under to the apprenticeship regulations adopted by the federal Secretary of Labor.(2) Has at least as many hours of on-the-job experience in the applicable occupation as would be required to graduate from an apprenticeship program for the applicable occupation that is approved by the chief.

2601. For purposes of this chapter:(a) Apprenticeable occupation means an occupation for which the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations had approved an apprenticeship program pursuant to Section 3075 of the Labor Code before January 1, 2014.(b) Chief means the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations.(c) Graduate of an apprenticeship program means either of the following:(1) An individual that has been issued a certificate of completion under the authority of the California Apprenticeship Council for completing an apprenticeship program approved by the chief pursuant to Section 3075 of the Labor Code.(2) An individual that has completed an apprenticeship program located outside California and approved for federal purposes pursuant to under the apprenticeship regulations adopted by the federal Secretary of Labor.(d) Skilled and trained workforce means a workforce that meets all of the following conditions:(1) All the workers performing work in an apprenticeable occupation in the building and construction trades are either skilled journeypersons or apprentices registered in an apprenticeship program approved by the chief.(2) (A) For work performed on or after January 1, 2017, at least 30 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the occupation of teamster.(B) For work performed on or after January 1, 2018, at least 40 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(C) For work performed on or after January 1, 2019, at least 50 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(D) For work performed on or after January 1, 2020, at least 60 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(3) For an apprenticeable occupation in which no apprenticeship program had been approved by the chief before January 1, 1995, up to one-half of the graduation percentage requirements of paragraph (2) may be satisfied by skilled journeypersons who commenced working in the apprenticeable occupation before the chiefs approval of an apprenticeship program for that occupation in the county in which the project is located.(4) The apprenticeship graduation percentage requirements of paragraph (2) are satisfied if, in a particular calendar month, either of the following is true:(A) At least the required percentage of the skilled journeypersons employed by the contractor or subcontractor to perform work on the contract or project meet the graduation percentage requirement.(B) For the hours of work performed by skilled journeypersons employed by the contractor or subcontractor on the contract or project, the percentage of hours performed by skilled journeypersons who met the graduation requirement is at least equal to the required graduation percentage.(5) The contractor or subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if, during the calendar month, the contractor or subcontractor employs skilled journeypersons to perform fewer than 10 hours of work on the contract or project.(6) A subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if both of the following requirements are met:(A) The subcontractor was not a listed subcontractor under Section 4104 or a substitute for a listed subcontractor.(B) The subcontract does not exceed one-half of 1 percent of the price of the prime contract.(e) Skilled journeyperson means a worker who either:(1) Graduated from an apprenticeship program for the applicable occupation that was approved by the chief or located outside California and approved for federal purposes pursuant under to the apprenticeship regulations adopted by the federal Secretary of Labor.(2) Has at least as many hours of on-the-job experience in the applicable occupation as would be required to graduate from an apprenticeship program for the applicable occupation that is approved by the chief.

2601. For purposes of this chapter:(a) Apprenticeable occupation means an occupation for which the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations had approved an apprenticeship program pursuant to Section 3075 of the Labor Code before January 1, 2014.(b) Chief means the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations.(c) Graduate of an apprenticeship program means either of the following:(1) An individual that has been issued a certificate of completion under the authority of the California Apprenticeship Council for completing an apprenticeship program approved by the chief pursuant to Section 3075 of the Labor Code.(2) An individual that has completed an apprenticeship program located outside California and approved for federal purposes pursuant to under the apprenticeship regulations adopted by the federal Secretary of Labor.(d) Skilled and trained workforce means a workforce that meets all of the following conditions:(1) All the workers performing work in an apprenticeable occupation in the building and construction trades are either skilled journeypersons or apprentices registered in an apprenticeship program approved by the chief.(2) (A) For work performed on or after January 1, 2017, at least 30 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the occupation of teamster.(B) For work performed on or after January 1, 2018, at least 40 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(C) For work performed on or after January 1, 2019, at least 50 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(D) For work performed on or after January 1, 2020, at least 60 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.(3) For an apprenticeable occupation in which no apprenticeship program had been approved by the chief before January 1, 1995, up to one-half of the graduation percentage requirements of paragraph (2) may be satisfied by skilled journeypersons who commenced working in the apprenticeable occupation before the chiefs approval of an apprenticeship program for that occupation in the county in which the project is located.(4) The apprenticeship graduation percentage requirements of paragraph (2) are satisfied if, in a particular calendar month, either of the following is true:(A) At least the required percentage of the skilled journeypersons employed by the contractor or subcontractor to perform work on the contract or project meet the graduation percentage requirement.(B) For the hours of work performed by skilled journeypersons employed by the contractor or subcontractor on the contract or project, the percentage of hours performed by skilled journeypersons who met the graduation requirement is at least equal to the required graduation percentage.(5) The contractor or subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if, during the calendar month, the contractor or subcontractor employs skilled journeypersons to perform fewer than 10 hours of work on the contract or project.(6) A subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if both of the following requirements are met:(A) The subcontractor was not a listed subcontractor under Section 4104 or a substitute for a listed subcontractor.(B) The subcontract does not exceed one-half of 1 percent of the price of the prime contract.(e) Skilled journeyperson means a worker who either:(1) Graduated from an apprenticeship program for the applicable occupation that was approved by the chief or located outside California and approved for federal purposes pursuant under to the apprenticeship regulations adopted by the federal Secretary of Labor.(2) Has at least as many hours of on-the-job experience in the applicable occupation as would be required to graduate from an apprenticeship program for the applicable occupation that is approved by the chief.



2601. For purposes of this chapter:

(a) Apprenticeable occupation means an occupation for which the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations had approved an apprenticeship program pursuant to Section 3075 of the Labor Code before January 1, 2014.

(b) Chief means the Chief of the Division of Apprenticeship Standards of the Department of Industrial Relations.

(c) Graduate of an apprenticeship program means either of the following:

(1) An individual that has been issued a certificate of completion under the authority of the California Apprenticeship Council for completing an apprenticeship program approved by the chief pursuant to Section 3075 of the Labor Code.

(2) An individual that has completed an apprenticeship program located outside California and approved for federal purposes pursuant to under the apprenticeship regulations adopted by the federal Secretary of Labor.

(d) Skilled and trained workforce means a workforce that meets all of the following conditions:

(1) All the workers performing work in an apprenticeable occupation in the building and construction trades are either skilled journeypersons or apprentices registered in an apprenticeship program approved by the chief.

(2) (A) For work performed on or after January 1, 2017, at least 30 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the occupation of teamster.

(B) For work performed on or after January 1, 2018, at least 40 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.

(C) For work performed on or after January 1, 2019, at least 50 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.

(D) For work performed on or after January 1, 2020, at least 60 percent of the skilled journeypersons employed to perform work on the contract or project by every contractor and each of its subcontractors at every tier are graduates of an apprenticeship program for the applicable occupation. This requirement shall not apply to work performed in the following occupations: acoustical installer, bricklayer, carpenter, cement mason, drywall installer or lather, marble mason, finisher, or setter, modular furniture or systems installer, operating engineer, pile driver, plasterer, roofer or waterproofer, stone mason, surveyor, teamster, terrazzo worker or finisher, and tile layer, setter, or finisher.

(3) For an apprenticeable occupation in which no apprenticeship program had been approved by the chief before January 1, 1995, up to one-half of the graduation percentage requirements of paragraph (2) may be satisfied by skilled journeypersons who commenced working in the apprenticeable occupation before the chiefs approval of an apprenticeship program for that occupation in the county in which the project is located.

(4) The apprenticeship graduation percentage requirements of paragraph (2) are satisfied if, in a particular calendar month, either of the following is true:

(A) At least the required percentage of the skilled journeypersons employed by the contractor or subcontractor to perform work on the contract or project meet the graduation percentage requirement.

(B) For the hours of work performed by skilled journeypersons employed by the contractor or subcontractor on the contract or project, the percentage of hours performed by skilled journeypersons who met the graduation requirement is at least equal to the required graduation percentage.

(5) The contractor or subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if, during the calendar month, the contractor or subcontractor employs skilled journeypersons to perform fewer than 10 hours of work on the contract or project.

(6) A subcontractor need not meet the apprenticeship graduation requirements of paragraph (2) if both of the following requirements are met:

(A) The subcontractor was not a listed subcontractor under Section 4104 or a substitute for a listed subcontractor.

(B) The subcontract does not exceed one-half of 1 percent of the price of the prime contract.

(e) Skilled journeyperson means a worker who either:

(1) Graduated from an apprenticeship program for the applicable occupation that was approved by the chief or located outside California and approved for federal purposes pursuant under to the apprenticeship regulations adopted by the federal Secretary of Labor.

(2) Has at least as many hours of on-the-job experience in the applicable occupation as would be required to graduate from an apprenticeship program for the applicable occupation that is approved by the chief.