California 2017-2018 Regular Session

California Assembly Bill AB823 Compare Versions

OldNewDifferences
1-Amended IN Senate July 06, 2017 Amended IN Senate June 12, 2017 Amended IN Senate June 06, 2017 Amended IN Senate May 26, 2017 Amended IN Assembly March 15, 2017 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION Assembly Bill No. 823Introduced by Assembly Member Chau(Coauthor: Assembly Member Lackey)February 16, 2017 An act to amend Section 26130 of the Business and Professions Code, relating to marijuana. cannabis.LEGISLATIVE COUNSEL'S DIGESTAB 823, as amended, Chau. Edible marijuana cannabis products: labeling.Existing law, the Control, Regulate and Tax Adult Use of Marijuana Act (AUMA), enacted by an initiative statute at the November 8, 2016, statewide general election, regulates the cultivation, distribution, and use of marijuana cannabis for nonmedical purposes by people 21 years of age and older, including edible marijuana cannabis products. Existing law requires an edible marijuana product that is in solid form to be delineated or scored into standardized serving sizes if the marijuana product contains more than one serving. places requirements on edible cannabis products, including that the cannabis product be marked with a universal symbol, as determined by the State Department of Public Health.This bill would amend the act by requiring each single serving of chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products to be stamped, marked, or otherwise imprinted directly on the product with a cannabis product symbol, to be designed by the State Department of Public Health. The bill would specify the required size and visibility of the cannabis product symbol. requiring the universal symbol required to be on edible cannabis product not sold as a liquid, loose bulk good, or powder to meet specified requirements, including that the symbol be placed directly on at least one side of each serving so as to be distinguishable and easily recognizable as well as size and placement requirements.AUMA authorizes the Legislature to amend, by a 2/3 vote, certain provisions of the act, provided that the amendments are consistent with and further the purposes and intent of the act.This bill would declare that its provisions further the purposes and the intent of the act.Digest Key Vote: 2/3 Appropriation: NO Fiscal Committee: YES Local Program: NO Bill TextThe people of the State of California do enact as follows:SECTION 1. Section 26130 of the Business and Professions Code is amended to read:26130. (a) The State Department of Public Health shall promulgate regulations governing the licensing of cannabis manufacturers and standards for the manufacturing, packaging, and labeling of all manufactured cannabis products. Licenses to be issued are as follows:(1) Manufacturing Level 1, for sites that manufacture cannabis products using nonvolatile solvents, or no solvents. A Manufacturing Level 1 M-Type 6 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(2) Manufacturing Level 2, for sites that manufacture cannabis products using volatile solvents. A Manufacturing Level 2 M-Type 7 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(b) For purposes of this section, volatile solvents shall have the same meaning as in paragraph (3) of subdivision (d) of Section 11362.3 of the Health and Safety Code, unless otherwise provided by law or regulation.(c) Edible cannabis products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain cannabis.(2) Produced and sold with a standardized concentration of cannabinoids not to exceed ten (10) milligrams tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the cannabis product contains more than one serving and is an edible cannabis product in solid form.(4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, that are similar to the standards for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the cannabis product and directions as to how to consume the cannabis product, as necessary.(7) (A) Marked with a universal symbol, as determined by the State Department of Public Health through regulation.(B) For edible cannabis products that are not sold as liquids, loose bulk goods, or powders, the symbol required by this paragraph shall meet both of the following requirements:(i) The symbol shall be placed directly on at least one side of each edible cannabis product serving so as to be distinguishable and easily recognizable.(ii) The symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(d) Cannabis, including concentrated cannabis, included in a cannabis product manufactured in compliance with law is not considered an adulterant under state law.SECTION 1.Section 26130 of the Business and Professions Code is amended to read:26130.(a)Marijuana products shall be:(1)Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.(2)Produced and sold with a standardized dosage of cannabinoids not to exceed 10 milligrams of tetrahydrocannabinol (THC) per serving.(3)Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form. (4)Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5)Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.(6)Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.(b)(1)Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.(2)The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(3)For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.(4)This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders. (c)Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.SEC. 2. The Legislature finds and declares that this act is consistent with, and furthers the purposes of, the Control, Regulate and Tax Adult Use of Marijuana Act.
1+Amended IN Senate June 12, 2017 Amended IN Senate June 06, 2017 Amended IN Senate May 26, 2017 Amended IN Assembly March 15, 2017 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION Assembly Bill No. 823Introduced by Assembly Member Chau(Coauthor: Assembly Member Lackey)February 16, 2017 An act to amend Section 26130 of the Business and Professions Code, relating to marijuana.LEGISLATIVE COUNSEL'S DIGESTAB 823, as amended, Chau. Edible marijuana products: labeling.Existing law, the Control, Regulate and Tax Adult Use of Marijuana Act (AUMA), enacted by an initiative statute at the November 8, 2016, statewide general election, regulates the cultivation, distribution, and use of marijuana for nonmedical purposes by people 21 years of age and older, including edible marijuana products. Existing law requires an edible marijuana product that is in solid form to be delineated or scored into standardized serving sizes if the marijuana product contains more than one serving. This bill would amend the act by requiring each single serving of chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products to be stamped, marked, or otherwise imprinted directly on the product with a cannabis product symbol, to be designed by the State Department of Public Health. The bill would specify the required size and visibility of the cannabis product symbol.AUMA authorizes the Legislature to amend, by a 2/3 vote, certain provisions of the act, provided that the amendments are consistent with and further the purposes and intent of the act.This bill would declare that its provisions further the purposes and the intent of the act.Digest Key Vote: 2/3 Appropriation: NO Fiscal Committee: YES Local Program: NO Bill TextThe people of the State of California do enact as follows:SECTION 1. Section 26130 of the Business and Professions Code is amended to read:26130. (a) Marijuana products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.(2) Produced and sold with a standardized dosage of cannabinoids not to exceed ten (10) 10 milligrams of tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form. (4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.(b) (1) Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.(2) The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(3) For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.(4) This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders. (c) Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.SEC. 2. The Legislature finds and declares that this act is consistent with, and furthers the purposes of, the Control, Regulate and Tax Adult Use of Marijuana Act.
22
3- Amended IN Senate July 06, 2017 Amended IN Senate June 12, 2017 Amended IN Senate June 06, 2017 Amended IN Senate May 26, 2017 Amended IN Assembly March 15, 2017 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION Assembly Bill No. 823Introduced by Assembly Member Chau(Coauthor: Assembly Member Lackey)February 16, 2017 An act to amend Section 26130 of the Business and Professions Code, relating to marijuana. cannabis.LEGISLATIVE COUNSEL'S DIGESTAB 823, as amended, Chau. Edible marijuana cannabis products: labeling.Existing law, the Control, Regulate and Tax Adult Use of Marijuana Act (AUMA), enacted by an initiative statute at the November 8, 2016, statewide general election, regulates the cultivation, distribution, and use of marijuana cannabis for nonmedical purposes by people 21 years of age and older, including edible marijuana cannabis products. Existing law requires an edible marijuana product that is in solid form to be delineated or scored into standardized serving sizes if the marijuana product contains more than one serving. places requirements on edible cannabis products, including that the cannabis product be marked with a universal symbol, as determined by the State Department of Public Health.This bill would amend the act by requiring each single serving of chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products to be stamped, marked, or otherwise imprinted directly on the product with a cannabis product symbol, to be designed by the State Department of Public Health. The bill would specify the required size and visibility of the cannabis product symbol. requiring the universal symbol required to be on edible cannabis product not sold as a liquid, loose bulk good, or powder to meet specified requirements, including that the symbol be placed directly on at least one side of each serving so as to be distinguishable and easily recognizable as well as size and placement requirements.AUMA authorizes the Legislature to amend, by a 2/3 vote, certain provisions of the act, provided that the amendments are consistent with and further the purposes and intent of the act.This bill would declare that its provisions further the purposes and the intent of the act.Digest Key Vote: 2/3 Appropriation: NO Fiscal Committee: YES Local Program: NO
3+ Amended IN Senate June 12, 2017 Amended IN Senate June 06, 2017 Amended IN Senate May 26, 2017 Amended IN Assembly March 15, 2017 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION Assembly Bill No. 823Introduced by Assembly Member Chau(Coauthor: Assembly Member Lackey)February 16, 2017 An act to amend Section 26130 of the Business and Professions Code, relating to marijuana.LEGISLATIVE COUNSEL'S DIGESTAB 823, as amended, Chau. Edible marijuana products: labeling.Existing law, the Control, Regulate and Tax Adult Use of Marijuana Act (AUMA), enacted by an initiative statute at the November 8, 2016, statewide general election, regulates the cultivation, distribution, and use of marijuana for nonmedical purposes by people 21 years of age and older, including edible marijuana products. Existing law requires an edible marijuana product that is in solid form to be delineated or scored into standardized serving sizes if the marijuana product contains more than one serving. This bill would amend the act by requiring each single serving of chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products to be stamped, marked, or otherwise imprinted directly on the product with a cannabis product symbol, to be designed by the State Department of Public Health. The bill would specify the required size and visibility of the cannabis product symbol.AUMA authorizes the Legislature to amend, by a 2/3 vote, certain provisions of the act, provided that the amendments are consistent with and further the purposes and intent of the act.This bill would declare that its provisions further the purposes and the intent of the act.Digest Key Vote: 2/3 Appropriation: NO Fiscal Committee: YES Local Program: NO
44
5- Amended IN Senate July 06, 2017 Amended IN Senate June 12, 2017 Amended IN Senate June 06, 2017 Amended IN Senate May 26, 2017 Amended IN Assembly March 15, 2017
5+ Amended IN Senate June 12, 2017 Amended IN Senate June 06, 2017 Amended IN Senate May 26, 2017 Amended IN Assembly March 15, 2017
66
7-Amended IN Senate July 06, 2017
87 Amended IN Senate June 12, 2017
98 Amended IN Senate June 06, 2017
109 Amended IN Senate May 26, 2017
1110 Amended IN Assembly March 15, 2017
1211
1312 CALIFORNIA LEGISLATURE 20172018 REGULAR SESSION
1413
1514 Assembly Bill No. 823
1615
1716 Introduced by Assembly Member Chau(Coauthor: Assembly Member Lackey)February 16, 2017
1817
1918 Introduced by Assembly Member Chau(Coauthor: Assembly Member Lackey)
2019 February 16, 2017
2120
22- An act to amend Section 26130 of the Business and Professions Code, relating to marijuana. cannabis.
21+ An act to amend Section 26130 of the Business and Professions Code, relating to marijuana.
2322
2423 LEGISLATIVE COUNSEL'S DIGEST
2524
2625 ## LEGISLATIVE COUNSEL'S DIGEST
2726
28-AB 823, as amended, Chau. Edible marijuana cannabis products: labeling.
27+AB 823, as amended, Chau. Edible marijuana products: labeling.
2928
30-Existing law, the Control, Regulate and Tax Adult Use of Marijuana Act (AUMA), enacted by an initiative statute at the November 8, 2016, statewide general election, regulates the cultivation, distribution, and use of marijuana cannabis for nonmedical purposes by people 21 years of age and older, including edible marijuana cannabis products. Existing law requires an edible marijuana product that is in solid form to be delineated or scored into standardized serving sizes if the marijuana product contains more than one serving. places requirements on edible cannabis products, including that the cannabis product be marked with a universal symbol, as determined by the State Department of Public Health.This bill would amend the act by requiring each single serving of chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products to be stamped, marked, or otherwise imprinted directly on the product with a cannabis product symbol, to be designed by the State Department of Public Health. The bill would specify the required size and visibility of the cannabis product symbol. requiring the universal symbol required to be on edible cannabis product not sold as a liquid, loose bulk good, or powder to meet specified requirements, including that the symbol be placed directly on at least one side of each serving so as to be distinguishable and easily recognizable as well as size and placement requirements.AUMA authorizes the Legislature to amend, by a 2/3 vote, certain provisions of the act, provided that the amendments are consistent with and further the purposes and intent of the act.This bill would declare that its provisions further the purposes and the intent of the act.
29+Existing law, the Control, Regulate and Tax Adult Use of Marijuana Act (AUMA), enacted by an initiative statute at the November 8, 2016, statewide general election, regulates the cultivation, distribution, and use of marijuana for nonmedical purposes by people 21 years of age and older, including edible marijuana products. Existing law requires an edible marijuana product that is in solid form to be delineated or scored into standardized serving sizes if the marijuana product contains more than one serving. This bill would amend the act by requiring each single serving of chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products to be stamped, marked, or otherwise imprinted directly on the product with a cannabis product symbol, to be designed by the State Department of Public Health. The bill would specify the required size and visibility of the cannabis product symbol.AUMA authorizes the Legislature to amend, by a 2/3 vote, certain provisions of the act, provided that the amendments are consistent with and further the purposes and intent of the act.This bill would declare that its provisions further the purposes and the intent of the act.
3130
32-Existing law, the Control, Regulate and Tax Adult Use of Marijuana Act (AUMA), enacted by an initiative statute at the November 8, 2016, statewide general election, regulates the cultivation, distribution, and use of marijuana cannabis for nonmedical purposes by people 21 years of age and older, including edible marijuana cannabis products. Existing law requires an edible marijuana product that is in solid form to be delineated or scored into standardized serving sizes if the marijuana product contains more than one serving. places requirements on edible cannabis products, including that the cannabis product be marked with a universal symbol, as determined by the State Department of Public Health.
31+Existing law, the Control, Regulate and Tax Adult Use of Marijuana Act (AUMA), enacted by an initiative statute at the November 8, 2016, statewide general election, regulates the cultivation, distribution, and use of marijuana for nonmedical purposes by people 21 years of age and older, including edible marijuana products. Existing law requires an edible marijuana product that is in solid form to be delineated or scored into standardized serving sizes if the marijuana product contains more than one serving.
3332
34-This bill would amend the act by requiring each single serving of chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products to be stamped, marked, or otherwise imprinted directly on the product with a cannabis product symbol, to be designed by the State Department of Public Health. The bill would specify the required size and visibility of the cannabis product symbol. requiring the universal symbol required to be on edible cannabis product not sold as a liquid, loose bulk good, or powder to meet specified requirements, including that the symbol be placed directly on at least one side of each serving so as to be distinguishable and easily recognizable as well as size and placement requirements.
33+This bill would amend the act by requiring each single serving of chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products to be stamped, marked, or otherwise imprinted directly on the product with a cannabis product symbol, to be designed by the State Department of Public Health. The bill would specify the required size and visibility of the cannabis product symbol.
3534
3635 AUMA authorizes the Legislature to amend, by a 2/3 vote, certain provisions of the act, provided that the amendments are consistent with and further the purposes and intent of the act.
3736
3837 This bill would declare that its provisions further the purposes and the intent of the act.
3938
4039 ## Digest Key
4140
4241 ## Bill Text
4342
44-The people of the State of California do enact as follows:SECTION 1. Section 26130 of the Business and Professions Code is amended to read:26130. (a) The State Department of Public Health shall promulgate regulations governing the licensing of cannabis manufacturers and standards for the manufacturing, packaging, and labeling of all manufactured cannabis products. Licenses to be issued are as follows:(1) Manufacturing Level 1, for sites that manufacture cannabis products using nonvolatile solvents, or no solvents. A Manufacturing Level 1 M-Type 6 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(2) Manufacturing Level 2, for sites that manufacture cannabis products using volatile solvents. A Manufacturing Level 2 M-Type 7 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(b) For purposes of this section, volatile solvents shall have the same meaning as in paragraph (3) of subdivision (d) of Section 11362.3 of the Health and Safety Code, unless otherwise provided by law or regulation.(c) Edible cannabis products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain cannabis.(2) Produced and sold with a standardized concentration of cannabinoids not to exceed ten (10) milligrams tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the cannabis product contains more than one serving and is an edible cannabis product in solid form.(4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, that are similar to the standards for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the cannabis product and directions as to how to consume the cannabis product, as necessary.(7) (A) Marked with a universal symbol, as determined by the State Department of Public Health through regulation.(B) For edible cannabis products that are not sold as liquids, loose bulk goods, or powders, the symbol required by this paragraph shall meet both of the following requirements:(i) The symbol shall be placed directly on at least one side of each edible cannabis product serving so as to be distinguishable and easily recognizable.(ii) The symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(d) Cannabis, including concentrated cannabis, included in a cannabis product manufactured in compliance with law is not considered an adulterant under state law.SECTION 1.Section 26130 of the Business and Professions Code is amended to read:26130.(a)Marijuana products shall be:(1)Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.(2)Produced and sold with a standardized dosage of cannabinoids not to exceed 10 milligrams of tetrahydrocannabinol (THC) per serving.(3)Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form. (4)Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5)Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.(6)Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.(b)(1)Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.(2)The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(3)For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.(4)This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders. (c)Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.SEC. 2. The Legislature finds and declares that this act is consistent with, and furthers the purposes of, the Control, Regulate and Tax Adult Use of Marijuana Act.
43+The people of the State of California do enact as follows:SECTION 1. Section 26130 of the Business and Professions Code is amended to read:26130. (a) Marijuana products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.(2) Produced and sold with a standardized dosage of cannabinoids not to exceed ten (10) 10 milligrams of tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form. (4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.(b) (1) Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.(2) The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(3) For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.(4) This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders. (c) Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.SEC. 2. The Legislature finds and declares that this act is consistent with, and furthers the purposes of, the Control, Regulate and Tax Adult Use of Marijuana Act.
4544
4645 The people of the State of California do enact as follows:
4746
4847 ## The people of the State of California do enact as follows:
4948
50-SECTION 1. Section 26130 of the Business and Professions Code is amended to read:26130. (a) The State Department of Public Health shall promulgate regulations governing the licensing of cannabis manufacturers and standards for the manufacturing, packaging, and labeling of all manufactured cannabis products. Licenses to be issued are as follows:(1) Manufacturing Level 1, for sites that manufacture cannabis products using nonvolatile solvents, or no solvents. A Manufacturing Level 1 M-Type 6 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(2) Manufacturing Level 2, for sites that manufacture cannabis products using volatile solvents. A Manufacturing Level 2 M-Type 7 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(b) For purposes of this section, volatile solvents shall have the same meaning as in paragraph (3) of subdivision (d) of Section 11362.3 of the Health and Safety Code, unless otherwise provided by law or regulation.(c) Edible cannabis products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain cannabis.(2) Produced and sold with a standardized concentration of cannabinoids not to exceed ten (10) milligrams tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the cannabis product contains more than one serving and is an edible cannabis product in solid form.(4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, that are similar to the standards for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the cannabis product and directions as to how to consume the cannabis product, as necessary.(7) (A) Marked with a universal symbol, as determined by the State Department of Public Health through regulation.(B) For edible cannabis products that are not sold as liquids, loose bulk goods, or powders, the symbol required by this paragraph shall meet both of the following requirements:(i) The symbol shall be placed directly on at least one side of each edible cannabis product serving so as to be distinguishable and easily recognizable.(ii) The symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(d) Cannabis, including concentrated cannabis, included in a cannabis product manufactured in compliance with law is not considered an adulterant under state law.
49+SECTION 1. Section 26130 of the Business and Professions Code is amended to read:26130. (a) Marijuana products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.(2) Produced and sold with a standardized dosage of cannabinoids not to exceed ten (10) 10 milligrams of tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form. (4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.(b) (1) Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.(2) The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(3) For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.(4) This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders. (c) Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.
5150
5251 SECTION 1. Section 26130 of the Business and Professions Code is amended to read:
5352
5453 ### SECTION 1.
5554
56-26130. (a) The State Department of Public Health shall promulgate regulations governing the licensing of cannabis manufacturers and standards for the manufacturing, packaging, and labeling of all manufactured cannabis products. Licenses to be issued are as follows:(1) Manufacturing Level 1, for sites that manufacture cannabis products using nonvolatile solvents, or no solvents. A Manufacturing Level 1 M-Type 6 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(2) Manufacturing Level 2, for sites that manufacture cannabis products using volatile solvents. A Manufacturing Level 2 M-Type 7 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(b) For purposes of this section, volatile solvents shall have the same meaning as in paragraph (3) of subdivision (d) of Section 11362.3 of the Health and Safety Code, unless otherwise provided by law or regulation.(c) Edible cannabis products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain cannabis.(2) Produced and sold with a standardized concentration of cannabinoids not to exceed ten (10) milligrams tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the cannabis product contains more than one serving and is an edible cannabis product in solid form.(4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, that are similar to the standards for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the cannabis product and directions as to how to consume the cannabis product, as necessary.(7) (A) Marked with a universal symbol, as determined by the State Department of Public Health through regulation.(B) For edible cannabis products that are not sold as liquids, loose bulk goods, or powders, the symbol required by this paragraph shall meet both of the following requirements:(i) The symbol shall be placed directly on at least one side of each edible cannabis product serving so as to be distinguishable and easily recognizable.(ii) The symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(d) Cannabis, including concentrated cannabis, included in a cannabis product manufactured in compliance with law is not considered an adulterant under state law.
55+26130. (a) Marijuana products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.(2) Produced and sold with a standardized dosage of cannabinoids not to exceed ten (10) 10 milligrams of tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form. (4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.(b) (1) Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.(2) The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(3) For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.(4) This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders. (c) Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.
5756
58-26130. (a) The State Department of Public Health shall promulgate regulations governing the licensing of cannabis manufacturers and standards for the manufacturing, packaging, and labeling of all manufactured cannabis products. Licenses to be issued are as follows:(1) Manufacturing Level 1, for sites that manufacture cannabis products using nonvolatile solvents, or no solvents. A Manufacturing Level 1 M-Type 6 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(2) Manufacturing Level 2, for sites that manufacture cannabis products using volatile solvents. A Manufacturing Level 2 M-Type 7 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(b) For purposes of this section, volatile solvents shall have the same meaning as in paragraph (3) of subdivision (d) of Section 11362.3 of the Health and Safety Code, unless otherwise provided by law or regulation.(c) Edible cannabis products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain cannabis.(2) Produced and sold with a standardized concentration of cannabinoids not to exceed ten (10) milligrams tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the cannabis product contains more than one serving and is an edible cannabis product in solid form.(4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, that are similar to the standards for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the cannabis product and directions as to how to consume the cannabis product, as necessary.(7) (A) Marked with a universal symbol, as determined by the State Department of Public Health through regulation.(B) For edible cannabis products that are not sold as liquids, loose bulk goods, or powders, the symbol required by this paragraph shall meet both of the following requirements:(i) The symbol shall be placed directly on at least one side of each edible cannabis product serving so as to be distinguishable and easily recognizable.(ii) The symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(d) Cannabis, including concentrated cannabis, included in a cannabis product manufactured in compliance with law is not considered an adulterant under state law.
57+26130. (a) Marijuana products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.(2) Produced and sold with a standardized dosage of cannabinoids not to exceed ten (10) 10 milligrams of tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form. (4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.(b) (1) Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.(2) The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(3) For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.(4) This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders. (c) Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.
5958
60-26130. (a) The State Department of Public Health shall promulgate regulations governing the licensing of cannabis manufacturers and standards for the manufacturing, packaging, and labeling of all manufactured cannabis products. Licenses to be issued are as follows:(1) Manufacturing Level 1, for sites that manufacture cannabis products using nonvolatile solvents, or no solvents. A Manufacturing Level 1 M-Type 6 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(2) Manufacturing Level 2, for sites that manufacture cannabis products using volatile solvents. A Manufacturing Level 2 M-Type 7 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.(b) For purposes of this section, volatile solvents shall have the same meaning as in paragraph (3) of subdivision (d) of Section 11362.3 of the Health and Safety Code, unless otherwise provided by law or regulation.(c) Edible cannabis products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain cannabis.(2) Produced and sold with a standardized concentration of cannabinoids not to exceed ten (10) milligrams tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the cannabis product contains more than one serving and is an edible cannabis product in solid form.(4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, that are similar to the standards for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the cannabis product and directions as to how to consume the cannabis product, as necessary.(7) (A) Marked with a universal symbol, as determined by the State Department of Public Health through regulation.(B) For edible cannabis products that are not sold as liquids, loose bulk goods, or powders, the symbol required by this paragraph shall meet both of the following requirements:(i) The symbol shall be placed directly on at least one side of each edible cannabis product serving so as to be distinguishable and easily recognizable.(ii) The symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(d) Cannabis, including concentrated cannabis, included in a cannabis product manufactured in compliance with law is not considered an adulterant under state law.
59+26130. (a) Marijuana products shall be:(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.(2) Produced and sold with a standardized dosage of cannabinoids not to exceed ten (10) 10 milligrams of tetrahydrocannabinol (THC) per serving.(3) Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form. (4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.(b) (1) Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.(2) The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.(3) For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.(4) This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders. (c) Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.
6160
6261
6362
64-26130. (a) The State Department of Public Health shall promulgate regulations governing the licensing of cannabis manufacturers and standards for the manufacturing, packaging, and labeling of all manufactured cannabis products. Licenses to be issued are as follows:
63+26130. (a) Marijuana products shall be:
6564
66-(1) Manufacturing Level 1, for sites that manufacture cannabis products using nonvolatile solvents, or no solvents. A Manufacturing Level 1 M-Type 6 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.
65+(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.
6766
68-(2) Manufacturing Level 2, for sites that manufacture cannabis products using volatile solvents. A Manufacturing Level 2 M-Type 7 licensee shall only manufacture cannabis products for sale by a retailer with an M-Type 10 license.
67+(2) Produced and sold with a standardized dosage of cannabinoids not to exceed ten (10) 10 milligrams of tetrahydrocannabinol (THC) per serving.
6968
70-(b) For purposes of this section, volatile solvents shall have the same meaning as in paragraph (3) of subdivision (d) of Section 11362.3 of the Health and Safety Code, unless otherwise provided by law or regulation.
71-
72-(c) Edible cannabis products shall be:
73-
74-(1) Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain cannabis.
75-
76-(2) Produced and sold with a standardized concentration of cannabinoids not to exceed ten (10) milligrams tetrahydrocannabinol (THC) per serving.
77-
78-(3) Delineated or scored into standardized serving sizes if the cannabis product contains more than one serving and is an edible cannabis product in solid form.
69+(3) Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form.
7970
8071 (4) Homogenized to ensure uniform disbursement of cannabinoids throughout the product.
8172
82-(5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, that are similar to the standards for preparation, storage, handling, and sale of food products.
83-
84-(6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the cannabis product and directions as to how to consume the cannabis product, as necessary.
85-
86-(7) (A) Marked with a universal symbol, as determined by the State Department of Public Health through regulation.
87-
88-(B) For edible cannabis products that are not sold as liquids, loose bulk goods, or powders, the symbol required by this paragraph shall meet both of the following requirements:
89-
90-(i) The symbol shall be placed directly on at least one side of each edible cannabis product serving so as to be distinguishable and easily recognizable.
91-
92-(ii) The symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.
93-
94-(d) Cannabis, including concentrated cannabis, included in a cannabis product manufactured in compliance with law is not considered an adulterant under state law.
95-
96-
97-
98-
99-
100-(a)Marijuana products shall be:
101-
102-
103-
104-(1)Not designed to be appealing to children or easily confused with commercially sold candy or foods that do not contain marijuana.
105-
106-
107-
108-(2)Produced and sold with a standardized dosage of cannabinoids not to exceed 10 milligrams of tetrahydrocannabinol (THC) per serving.
109-
110-
111-
112-(3)Delineated or scored into standardized serving sizes if the marijuana product contains more than one serving and is an edible marijuana product in solid form.
113-
114-
115-
116-(4)Homogenized to ensure uniform disbursement of cannabinoids throughout the product.
117-
118-
119-
12073 (5) Manufactured and sold under sanitation standards established by the State Department of Public Health, in consultation with the bureau, for preparation, storage, handling, and sale of food products.
121-
122-
12374
12475 (6) Provided to customers with sufficient information to enable the informed consumption of the product, including the potential effects of the marijuana product and directions as to how to consume the marijuana product, as necessary.
12576
126-
127-
12877 (b) (1) Chocolate, soft confections, hard confections and lozenges, consolidated baked goods, and pressed pills and capsules that include marijuana or marijuana products shall be stamped, marked, or otherwise imprinted on each single serving with a cannabis product symbol, designed by the State Department of Public Health. The symbol shall be placed directly on at least one side of each edible marijuana product serving so as to be distinguishable and easily recognizable.
129-
130-
13178
13279 (2) The cannabis product symbol shall be centered either horizontally or vertically on the single serving. If centered horizontally, the height and width of the symbol shall be at least 25 percent of the servings width, but not less than one-quarter inch square. If centered vertically, the height and width of the symbol shall be at least 25 percent of the servings height, but not less than one-quarter inch square. If the product is one-quarter inch square or smaller, the cannabis product symbol shall be at least 25 percent of the servings height or width and centered either horizontally or vertically.
13380
134-
135-
13681 (3) For purposes of this subdivision, consolidated baked goods includes, but is not limited to, cookies, brownies, cupcakes, and granola bars.
137-
138-
13982
14083 (4) This subdivision does not apply to marijuana products that are liquids, loose bulk goods, or powders.
14184
142-
143-
14485 (c) Marijuana, including concentrated cannabis, included in a marijuana product manufactured in compliance with law is not an adulterant under state law.
145-
146-
14786
14887 SEC. 2. The Legislature finds and declares that this act is consistent with, and furthers the purposes of, the Control, Regulate and Tax Adult Use of Marijuana Act.
14988
15089 SEC. 2. The Legislature finds and declares that this act is consistent with, and furthers the purposes of, the Control, Regulate and Tax Adult Use of Marijuana Act.
15190
15291 SEC. 2. The Legislature finds and declares that this act is consistent with, and furthers the purposes of, the Control, Regulate and Tax Adult Use of Marijuana Act.
15392
15493 ### SEC. 2.