California 2019-2020 Regular Session

California Assembly Bill AB3217 Compare Versions

Only one version of the bill is available at this time.
OldNewDifferences
11 CALIFORNIA LEGISLATURE 20192020 REGULAR SESSION Assembly Bill No. 3217Introduced by Assembly Member GloriaFebruary 21, 2020 An act to add Section 39735 to the Health and Safety Code, relating to greenhouse gases. LEGISLATIVE COUNSEL'S DIGESTAB 3217, as introduced, Gloria. Greenhouse gases: crude oil emissions.Existing law establishes the State Air Resources Board as the state agency charged with monitoring and regulating sources of greenhouse gas emissions. Existing law requires the board to make available, and update at least annually, on its internet website the emissions of greenhouse gases, criteria pollutants, and toxic air contaminants for certain facilities in the state, and to annually present an informational report to a specific legislative committee on the reported emissions of greenhouse gases, criteria pollutants, and toxic air contaminants from certain energy and industry sectors, as prescribed.This bill would require, no later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, to complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state, as prescribed. The bill would require the state board to make a draft of the completed analysis and all supporting data, as specified, available for public comment.The bill would require, on or before January 1, 2021, and annually thereafter, that all operators that have received authorization from the Geologic Energy Management Division to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, to deliver to the state board a multicut assay, as defined, for each oil field in which the activity has been authorized, or, in certain circumstances, for each production pool in such field. The bill would also require, beginning January 1, 2021, that the owner or operator of a refinery, as defined, deliver to the state board an annual report that includes specified information regarding the crude oil processed by the refinery. The bill would require the state board to post certain information it receives from refinery owners or operators on its internet website.Digest Key Vote: MAJORITY Appropriation: NO Fiscal Committee: YES Local Program: NO Bill TextThe people of the State of California do enact as follows:SECTION 1. Section 39735 is added to the Health and Safety Code, to read:39735. (a) For purposes of this section, the following definitions shall apply:(1) Life-cycle emissions means all emissions associated with production, processing, refining, shipping, petroleum product transportation, end uses, and disposal of a crude oil and its associated gas, all derivative products, and wastes.(2) Multicut assay means determination by a qualified laboratory of both of the following:(A) The characteristics of a crude oil type, including gravity, density, chemical content, including sulfur, nitrogen, and hydrogen, volume and mass flow, microcarbon or Conradson carbon residue, and viscosity for vacuum residuum. Each of these parameters shall be assessed at a range of cut temperatures that shall include at minimum the following nine set points in degrees Centigrade: 80, 180, 290, 343, 399, 454, 525, 525 plus, and 399 plus, where plus indicates the highest temperature at which 100 percent of the crude oil has been distilled.(B) Levels of benzene, nickel, vanadium, selenium, acidity, viscosity, mercury, microcarbon or Conradson carbon residue, and any other crude oil characteristics or constituents that the state board identifies as pertinent to protection of health, safety, or the environment, assessed on the whole crude.(b) No later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, shall complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state. The analysis shall include the following elements and any other elements deemed appropriate and necessary by the state board:(1) Quantification of the per-barrel life-cycle emissions of greenhouse gases, as defined in Section 38505 of the Health and Safety Code, from each of the crude oil types produced in California.(A) The analysis shall separately identify the life-cycle emissions of greenhouse gases associated with each crude oil production field in California, or with each production pool in any such field to the extent the state board determines necessary pursuant to subdivision (c) to address variations in crude oil characteristics within a production field.(B) The analysis shall employ a methodology that considers the characteristics of the crude oil from each assessed production field or pool, as reflected in the multicut assays referenced in subdivision (c) of this section and any other relevant information.(2) Identification of data gaps in the life cycle analysis.(3) Assessment of the social costs, as defined in Section 38506, of the life-cycle emissions of greenhouse gases associated with each assessed production field or pool.(4) Criteria that may be used to establish thresholds of significance that could be applied in a determination of significance pursuant to Section 21082.2 of the Public Resources Code for life-cycle greenhouse gas impacts of emissions associated with oil production and refining in California. In determining these criteria, the state board shall consider all of the following:(A) The cumulative greenhouse gas impacts of crude oil production and refining in the state.(B) State, local, national, and international greenhouse gas reduction targets.(C) The social costs of greenhouse gases as determined pursuant to paragraph (3).(D) Other factors the state board finds appropriate.(5) Identification of means to reduce life-cycle emissions of greenhouse gases associated with production and refining of crude oil in the state, including direct reductions in process emissions and reductions in the volume of production or refining of particular types of crude oil.(c) On or before January 1, 2021, and annually thereafter, all operators that have received authorization from the Geologic Energy Management Division in the Department of Conservation to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, shall deliver to the state board a multicut assay for each oil field in which such activity has been authorized, or for each production pool in such field to the extent the state board determines that variations in crude characteristics may exist within a production field sufficient to affect the life-cycle emissions analysis to be prepared pursuant to subdivision (b). Operators shall further deliver to the state board any additional multicut assays that the state board determines are necessary.(d) Beginning January 1, 2021, the owner or operator of a refinery, as defined in Section 25128 of the Public Resources Code, shall deliver to the state board an annual report that shall include both of the following:(1) The volume of each crude oil identified by trade name, and each blend that includes such oil, processed at the refinery during the reporting period.(2) A multicut assay for each crude oil or blend reported pursuant to paragraph (1) that was produced in whole or part outside the state.(e) The state board shall promptly post all multicut assays received pursuant to subdivision (c) or (d) on its internet website.(f) The state board shall provide opportunities for public participation in development of the life-cycle emissions analysis required pursuant to subdivision (b) and shall make a draft of the completed analysis available for public comment. Upon the release of the draft life-cycle emissions analysis, the state board shall make available to the public all supporting data to the extent release of the data is not prohibited by law.
22
33 CALIFORNIA LEGISLATURE 20192020 REGULAR SESSION Assembly Bill No. 3217Introduced by Assembly Member GloriaFebruary 21, 2020 An act to add Section 39735 to the Health and Safety Code, relating to greenhouse gases. LEGISLATIVE COUNSEL'S DIGESTAB 3217, as introduced, Gloria. Greenhouse gases: crude oil emissions.Existing law establishes the State Air Resources Board as the state agency charged with monitoring and regulating sources of greenhouse gas emissions. Existing law requires the board to make available, and update at least annually, on its internet website the emissions of greenhouse gases, criteria pollutants, and toxic air contaminants for certain facilities in the state, and to annually present an informational report to a specific legislative committee on the reported emissions of greenhouse gases, criteria pollutants, and toxic air contaminants from certain energy and industry sectors, as prescribed.This bill would require, no later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, to complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state, as prescribed. The bill would require the state board to make a draft of the completed analysis and all supporting data, as specified, available for public comment.The bill would require, on or before January 1, 2021, and annually thereafter, that all operators that have received authorization from the Geologic Energy Management Division to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, to deliver to the state board a multicut assay, as defined, for each oil field in which the activity has been authorized, or, in certain circumstances, for each production pool in such field. The bill would also require, beginning January 1, 2021, that the owner or operator of a refinery, as defined, deliver to the state board an annual report that includes specified information regarding the crude oil processed by the refinery. The bill would require the state board to post certain information it receives from refinery owners or operators on its internet website.Digest Key Vote: MAJORITY Appropriation: NO Fiscal Committee: YES Local Program: NO
44
55
66
77
88
99 CALIFORNIA LEGISLATURE 20192020 REGULAR SESSION
1010
1111 Assembly Bill
1212
1313 No. 3217
1414
1515 Introduced by Assembly Member GloriaFebruary 21, 2020
1616
1717 Introduced by Assembly Member Gloria
1818 February 21, 2020
1919
2020 An act to add Section 39735 to the Health and Safety Code, relating to greenhouse gases.
2121
2222 LEGISLATIVE COUNSEL'S DIGEST
2323
2424 ## LEGISLATIVE COUNSEL'S DIGEST
2525
2626 AB 3217, as introduced, Gloria. Greenhouse gases: crude oil emissions.
2727
2828 Existing law establishes the State Air Resources Board as the state agency charged with monitoring and regulating sources of greenhouse gas emissions. Existing law requires the board to make available, and update at least annually, on its internet website the emissions of greenhouse gases, criteria pollutants, and toxic air contaminants for certain facilities in the state, and to annually present an informational report to a specific legislative committee on the reported emissions of greenhouse gases, criteria pollutants, and toxic air contaminants from certain energy and industry sectors, as prescribed.This bill would require, no later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, to complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state, as prescribed. The bill would require the state board to make a draft of the completed analysis and all supporting data, as specified, available for public comment.The bill would require, on or before January 1, 2021, and annually thereafter, that all operators that have received authorization from the Geologic Energy Management Division to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, to deliver to the state board a multicut assay, as defined, for each oil field in which the activity has been authorized, or, in certain circumstances, for each production pool in such field. The bill would also require, beginning January 1, 2021, that the owner or operator of a refinery, as defined, deliver to the state board an annual report that includes specified information regarding the crude oil processed by the refinery. The bill would require the state board to post certain information it receives from refinery owners or operators on its internet website.
2929
3030 Existing law establishes the State Air Resources Board as the state agency charged with monitoring and regulating sources of greenhouse gas emissions. Existing law requires the board to make available, and update at least annually, on its internet website the emissions of greenhouse gases, criteria pollutants, and toxic air contaminants for certain facilities in the state, and to annually present an informational report to a specific legislative committee on the reported emissions of greenhouse gases, criteria pollutants, and toxic air contaminants from certain energy and industry sectors, as prescribed.
3131
3232 This bill would require, no later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, to complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state, as prescribed. The bill would require the state board to make a draft of the completed analysis and all supporting data, as specified, available for public comment.
3333
3434 The bill would require, on or before January 1, 2021, and annually thereafter, that all operators that have received authorization from the Geologic Energy Management Division to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, to deliver to the state board a multicut assay, as defined, for each oil field in which the activity has been authorized, or, in certain circumstances, for each production pool in such field. The bill would also require, beginning January 1, 2021, that the owner or operator of a refinery, as defined, deliver to the state board an annual report that includes specified information regarding the crude oil processed by the refinery. The bill would require the state board to post certain information it receives from refinery owners or operators on its internet website.
3535
3636 ## Digest Key
3737
3838 ## Bill Text
3939
4040 The people of the State of California do enact as follows:SECTION 1. Section 39735 is added to the Health and Safety Code, to read:39735. (a) For purposes of this section, the following definitions shall apply:(1) Life-cycle emissions means all emissions associated with production, processing, refining, shipping, petroleum product transportation, end uses, and disposal of a crude oil and its associated gas, all derivative products, and wastes.(2) Multicut assay means determination by a qualified laboratory of both of the following:(A) The characteristics of a crude oil type, including gravity, density, chemical content, including sulfur, nitrogen, and hydrogen, volume and mass flow, microcarbon or Conradson carbon residue, and viscosity for vacuum residuum. Each of these parameters shall be assessed at a range of cut temperatures that shall include at minimum the following nine set points in degrees Centigrade: 80, 180, 290, 343, 399, 454, 525, 525 plus, and 399 plus, where plus indicates the highest temperature at which 100 percent of the crude oil has been distilled.(B) Levels of benzene, nickel, vanadium, selenium, acidity, viscosity, mercury, microcarbon or Conradson carbon residue, and any other crude oil characteristics or constituents that the state board identifies as pertinent to protection of health, safety, or the environment, assessed on the whole crude.(b) No later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, shall complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state. The analysis shall include the following elements and any other elements deemed appropriate and necessary by the state board:(1) Quantification of the per-barrel life-cycle emissions of greenhouse gases, as defined in Section 38505 of the Health and Safety Code, from each of the crude oil types produced in California.(A) The analysis shall separately identify the life-cycle emissions of greenhouse gases associated with each crude oil production field in California, or with each production pool in any such field to the extent the state board determines necessary pursuant to subdivision (c) to address variations in crude oil characteristics within a production field.(B) The analysis shall employ a methodology that considers the characteristics of the crude oil from each assessed production field or pool, as reflected in the multicut assays referenced in subdivision (c) of this section and any other relevant information.(2) Identification of data gaps in the life cycle analysis.(3) Assessment of the social costs, as defined in Section 38506, of the life-cycle emissions of greenhouse gases associated with each assessed production field or pool.(4) Criteria that may be used to establish thresholds of significance that could be applied in a determination of significance pursuant to Section 21082.2 of the Public Resources Code for life-cycle greenhouse gas impacts of emissions associated with oil production and refining in California. In determining these criteria, the state board shall consider all of the following:(A) The cumulative greenhouse gas impacts of crude oil production and refining in the state.(B) State, local, national, and international greenhouse gas reduction targets.(C) The social costs of greenhouse gases as determined pursuant to paragraph (3).(D) Other factors the state board finds appropriate.(5) Identification of means to reduce life-cycle emissions of greenhouse gases associated with production and refining of crude oil in the state, including direct reductions in process emissions and reductions in the volume of production or refining of particular types of crude oil.(c) On or before January 1, 2021, and annually thereafter, all operators that have received authorization from the Geologic Energy Management Division in the Department of Conservation to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, shall deliver to the state board a multicut assay for each oil field in which such activity has been authorized, or for each production pool in such field to the extent the state board determines that variations in crude characteristics may exist within a production field sufficient to affect the life-cycle emissions analysis to be prepared pursuant to subdivision (b). Operators shall further deliver to the state board any additional multicut assays that the state board determines are necessary.(d) Beginning January 1, 2021, the owner or operator of a refinery, as defined in Section 25128 of the Public Resources Code, shall deliver to the state board an annual report that shall include both of the following:(1) The volume of each crude oil identified by trade name, and each blend that includes such oil, processed at the refinery during the reporting period.(2) A multicut assay for each crude oil or blend reported pursuant to paragraph (1) that was produced in whole or part outside the state.(e) The state board shall promptly post all multicut assays received pursuant to subdivision (c) or (d) on its internet website.(f) The state board shall provide opportunities for public participation in development of the life-cycle emissions analysis required pursuant to subdivision (b) and shall make a draft of the completed analysis available for public comment. Upon the release of the draft life-cycle emissions analysis, the state board shall make available to the public all supporting data to the extent release of the data is not prohibited by law.
4141
4242 The people of the State of California do enact as follows:
4343
4444 ## The people of the State of California do enact as follows:
4545
4646 SECTION 1. Section 39735 is added to the Health and Safety Code, to read:39735. (a) For purposes of this section, the following definitions shall apply:(1) Life-cycle emissions means all emissions associated with production, processing, refining, shipping, petroleum product transportation, end uses, and disposal of a crude oil and its associated gas, all derivative products, and wastes.(2) Multicut assay means determination by a qualified laboratory of both of the following:(A) The characteristics of a crude oil type, including gravity, density, chemical content, including sulfur, nitrogen, and hydrogen, volume and mass flow, microcarbon or Conradson carbon residue, and viscosity for vacuum residuum. Each of these parameters shall be assessed at a range of cut temperatures that shall include at minimum the following nine set points in degrees Centigrade: 80, 180, 290, 343, 399, 454, 525, 525 plus, and 399 plus, where plus indicates the highest temperature at which 100 percent of the crude oil has been distilled.(B) Levels of benzene, nickel, vanadium, selenium, acidity, viscosity, mercury, microcarbon or Conradson carbon residue, and any other crude oil characteristics or constituents that the state board identifies as pertinent to protection of health, safety, or the environment, assessed on the whole crude.(b) No later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, shall complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state. The analysis shall include the following elements and any other elements deemed appropriate and necessary by the state board:(1) Quantification of the per-barrel life-cycle emissions of greenhouse gases, as defined in Section 38505 of the Health and Safety Code, from each of the crude oil types produced in California.(A) The analysis shall separately identify the life-cycle emissions of greenhouse gases associated with each crude oil production field in California, or with each production pool in any such field to the extent the state board determines necessary pursuant to subdivision (c) to address variations in crude oil characteristics within a production field.(B) The analysis shall employ a methodology that considers the characteristics of the crude oil from each assessed production field or pool, as reflected in the multicut assays referenced in subdivision (c) of this section and any other relevant information.(2) Identification of data gaps in the life cycle analysis.(3) Assessment of the social costs, as defined in Section 38506, of the life-cycle emissions of greenhouse gases associated with each assessed production field or pool.(4) Criteria that may be used to establish thresholds of significance that could be applied in a determination of significance pursuant to Section 21082.2 of the Public Resources Code for life-cycle greenhouse gas impacts of emissions associated with oil production and refining in California. In determining these criteria, the state board shall consider all of the following:(A) The cumulative greenhouse gas impacts of crude oil production and refining in the state.(B) State, local, national, and international greenhouse gas reduction targets.(C) The social costs of greenhouse gases as determined pursuant to paragraph (3).(D) Other factors the state board finds appropriate.(5) Identification of means to reduce life-cycle emissions of greenhouse gases associated with production and refining of crude oil in the state, including direct reductions in process emissions and reductions in the volume of production or refining of particular types of crude oil.(c) On or before January 1, 2021, and annually thereafter, all operators that have received authorization from the Geologic Energy Management Division in the Department of Conservation to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, shall deliver to the state board a multicut assay for each oil field in which such activity has been authorized, or for each production pool in such field to the extent the state board determines that variations in crude characteristics may exist within a production field sufficient to affect the life-cycle emissions analysis to be prepared pursuant to subdivision (b). Operators shall further deliver to the state board any additional multicut assays that the state board determines are necessary.(d) Beginning January 1, 2021, the owner or operator of a refinery, as defined in Section 25128 of the Public Resources Code, shall deliver to the state board an annual report that shall include both of the following:(1) The volume of each crude oil identified by trade name, and each blend that includes such oil, processed at the refinery during the reporting period.(2) A multicut assay for each crude oil or blend reported pursuant to paragraph (1) that was produced in whole or part outside the state.(e) The state board shall promptly post all multicut assays received pursuant to subdivision (c) or (d) on its internet website.(f) The state board shall provide opportunities for public participation in development of the life-cycle emissions analysis required pursuant to subdivision (b) and shall make a draft of the completed analysis available for public comment. Upon the release of the draft life-cycle emissions analysis, the state board shall make available to the public all supporting data to the extent release of the data is not prohibited by law.
4747
4848 SECTION 1. Section 39735 is added to the Health and Safety Code, to read:
4949
5050 ### SECTION 1.
5151
5252 39735. (a) For purposes of this section, the following definitions shall apply:(1) Life-cycle emissions means all emissions associated with production, processing, refining, shipping, petroleum product transportation, end uses, and disposal of a crude oil and its associated gas, all derivative products, and wastes.(2) Multicut assay means determination by a qualified laboratory of both of the following:(A) The characteristics of a crude oil type, including gravity, density, chemical content, including sulfur, nitrogen, and hydrogen, volume and mass flow, microcarbon or Conradson carbon residue, and viscosity for vacuum residuum. Each of these parameters shall be assessed at a range of cut temperatures that shall include at minimum the following nine set points in degrees Centigrade: 80, 180, 290, 343, 399, 454, 525, 525 plus, and 399 plus, where plus indicates the highest temperature at which 100 percent of the crude oil has been distilled.(B) Levels of benzene, nickel, vanadium, selenium, acidity, viscosity, mercury, microcarbon or Conradson carbon residue, and any other crude oil characteristics or constituents that the state board identifies as pertinent to protection of health, safety, or the environment, assessed on the whole crude.(b) No later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, shall complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state. The analysis shall include the following elements and any other elements deemed appropriate and necessary by the state board:(1) Quantification of the per-barrel life-cycle emissions of greenhouse gases, as defined in Section 38505 of the Health and Safety Code, from each of the crude oil types produced in California.(A) The analysis shall separately identify the life-cycle emissions of greenhouse gases associated with each crude oil production field in California, or with each production pool in any such field to the extent the state board determines necessary pursuant to subdivision (c) to address variations in crude oil characteristics within a production field.(B) The analysis shall employ a methodology that considers the characteristics of the crude oil from each assessed production field or pool, as reflected in the multicut assays referenced in subdivision (c) of this section and any other relevant information.(2) Identification of data gaps in the life cycle analysis.(3) Assessment of the social costs, as defined in Section 38506, of the life-cycle emissions of greenhouse gases associated with each assessed production field or pool.(4) Criteria that may be used to establish thresholds of significance that could be applied in a determination of significance pursuant to Section 21082.2 of the Public Resources Code for life-cycle greenhouse gas impacts of emissions associated with oil production and refining in California. In determining these criteria, the state board shall consider all of the following:(A) The cumulative greenhouse gas impacts of crude oil production and refining in the state.(B) State, local, national, and international greenhouse gas reduction targets.(C) The social costs of greenhouse gases as determined pursuant to paragraph (3).(D) Other factors the state board finds appropriate.(5) Identification of means to reduce life-cycle emissions of greenhouse gases associated with production and refining of crude oil in the state, including direct reductions in process emissions and reductions in the volume of production or refining of particular types of crude oil.(c) On or before January 1, 2021, and annually thereafter, all operators that have received authorization from the Geologic Energy Management Division in the Department of Conservation to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, shall deliver to the state board a multicut assay for each oil field in which such activity has been authorized, or for each production pool in such field to the extent the state board determines that variations in crude characteristics may exist within a production field sufficient to affect the life-cycle emissions analysis to be prepared pursuant to subdivision (b). Operators shall further deliver to the state board any additional multicut assays that the state board determines are necessary.(d) Beginning January 1, 2021, the owner or operator of a refinery, as defined in Section 25128 of the Public Resources Code, shall deliver to the state board an annual report that shall include both of the following:(1) The volume of each crude oil identified by trade name, and each blend that includes such oil, processed at the refinery during the reporting period.(2) A multicut assay for each crude oil or blend reported pursuant to paragraph (1) that was produced in whole or part outside the state.(e) The state board shall promptly post all multicut assays received pursuant to subdivision (c) or (d) on its internet website.(f) The state board shall provide opportunities for public participation in development of the life-cycle emissions analysis required pursuant to subdivision (b) and shall make a draft of the completed analysis available for public comment. Upon the release of the draft life-cycle emissions analysis, the state board shall make available to the public all supporting data to the extent release of the data is not prohibited by law.
5353
5454 39735. (a) For purposes of this section, the following definitions shall apply:(1) Life-cycle emissions means all emissions associated with production, processing, refining, shipping, petroleum product transportation, end uses, and disposal of a crude oil and its associated gas, all derivative products, and wastes.(2) Multicut assay means determination by a qualified laboratory of both of the following:(A) The characteristics of a crude oil type, including gravity, density, chemical content, including sulfur, nitrogen, and hydrogen, volume and mass flow, microcarbon or Conradson carbon residue, and viscosity for vacuum residuum. Each of these parameters shall be assessed at a range of cut temperatures that shall include at minimum the following nine set points in degrees Centigrade: 80, 180, 290, 343, 399, 454, 525, 525 plus, and 399 plus, where plus indicates the highest temperature at which 100 percent of the crude oil has been distilled.(B) Levels of benzene, nickel, vanadium, selenium, acidity, viscosity, mercury, microcarbon or Conradson carbon residue, and any other crude oil characteristics or constituents that the state board identifies as pertinent to protection of health, safety, or the environment, assessed on the whole crude.(b) No later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, shall complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state. The analysis shall include the following elements and any other elements deemed appropriate and necessary by the state board:(1) Quantification of the per-barrel life-cycle emissions of greenhouse gases, as defined in Section 38505 of the Health and Safety Code, from each of the crude oil types produced in California.(A) The analysis shall separately identify the life-cycle emissions of greenhouse gases associated with each crude oil production field in California, or with each production pool in any such field to the extent the state board determines necessary pursuant to subdivision (c) to address variations in crude oil characteristics within a production field.(B) The analysis shall employ a methodology that considers the characteristics of the crude oil from each assessed production field or pool, as reflected in the multicut assays referenced in subdivision (c) of this section and any other relevant information.(2) Identification of data gaps in the life cycle analysis.(3) Assessment of the social costs, as defined in Section 38506, of the life-cycle emissions of greenhouse gases associated with each assessed production field or pool.(4) Criteria that may be used to establish thresholds of significance that could be applied in a determination of significance pursuant to Section 21082.2 of the Public Resources Code for life-cycle greenhouse gas impacts of emissions associated with oil production and refining in California. In determining these criteria, the state board shall consider all of the following:(A) The cumulative greenhouse gas impacts of crude oil production and refining in the state.(B) State, local, national, and international greenhouse gas reduction targets.(C) The social costs of greenhouse gases as determined pursuant to paragraph (3).(D) Other factors the state board finds appropriate.(5) Identification of means to reduce life-cycle emissions of greenhouse gases associated with production and refining of crude oil in the state, including direct reductions in process emissions and reductions in the volume of production or refining of particular types of crude oil.(c) On or before January 1, 2021, and annually thereafter, all operators that have received authorization from the Geologic Energy Management Division in the Department of Conservation to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, shall deliver to the state board a multicut assay for each oil field in which such activity has been authorized, or for each production pool in such field to the extent the state board determines that variations in crude characteristics may exist within a production field sufficient to affect the life-cycle emissions analysis to be prepared pursuant to subdivision (b). Operators shall further deliver to the state board any additional multicut assays that the state board determines are necessary.(d) Beginning January 1, 2021, the owner or operator of a refinery, as defined in Section 25128 of the Public Resources Code, shall deliver to the state board an annual report that shall include both of the following:(1) The volume of each crude oil identified by trade name, and each blend that includes such oil, processed at the refinery during the reporting period.(2) A multicut assay for each crude oil or blend reported pursuant to paragraph (1) that was produced in whole or part outside the state.(e) The state board shall promptly post all multicut assays received pursuant to subdivision (c) or (d) on its internet website.(f) The state board shall provide opportunities for public participation in development of the life-cycle emissions analysis required pursuant to subdivision (b) and shall make a draft of the completed analysis available for public comment. Upon the release of the draft life-cycle emissions analysis, the state board shall make available to the public all supporting data to the extent release of the data is not prohibited by law.
5555
5656 39735. (a) For purposes of this section, the following definitions shall apply:(1) Life-cycle emissions means all emissions associated with production, processing, refining, shipping, petroleum product transportation, end uses, and disposal of a crude oil and its associated gas, all derivative products, and wastes.(2) Multicut assay means determination by a qualified laboratory of both of the following:(A) The characteristics of a crude oil type, including gravity, density, chemical content, including sulfur, nitrogen, and hydrogen, volume and mass flow, microcarbon or Conradson carbon residue, and viscosity for vacuum residuum. Each of these parameters shall be assessed at a range of cut temperatures that shall include at minimum the following nine set points in degrees Centigrade: 80, 180, 290, 343, 399, 454, 525, 525 plus, and 399 plus, where plus indicates the highest temperature at which 100 percent of the crude oil has been distilled.(B) Levels of benzene, nickel, vanadium, selenium, acidity, viscosity, mercury, microcarbon or Conradson carbon residue, and any other crude oil characteristics or constituents that the state board identifies as pertinent to protection of health, safety, or the environment, assessed on the whole crude.(b) No later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, shall complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state. The analysis shall include the following elements and any other elements deemed appropriate and necessary by the state board:(1) Quantification of the per-barrel life-cycle emissions of greenhouse gases, as defined in Section 38505 of the Health and Safety Code, from each of the crude oil types produced in California.(A) The analysis shall separately identify the life-cycle emissions of greenhouse gases associated with each crude oil production field in California, or with each production pool in any such field to the extent the state board determines necessary pursuant to subdivision (c) to address variations in crude oil characteristics within a production field.(B) The analysis shall employ a methodology that considers the characteristics of the crude oil from each assessed production field or pool, as reflected in the multicut assays referenced in subdivision (c) of this section and any other relevant information.(2) Identification of data gaps in the life cycle analysis.(3) Assessment of the social costs, as defined in Section 38506, of the life-cycle emissions of greenhouse gases associated with each assessed production field or pool.(4) Criteria that may be used to establish thresholds of significance that could be applied in a determination of significance pursuant to Section 21082.2 of the Public Resources Code for life-cycle greenhouse gas impacts of emissions associated with oil production and refining in California. In determining these criteria, the state board shall consider all of the following:(A) The cumulative greenhouse gas impacts of crude oil production and refining in the state.(B) State, local, national, and international greenhouse gas reduction targets.(C) The social costs of greenhouse gases as determined pursuant to paragraph (3).(D) Other factors the state board finds appropriate.(5) Identification of means to reduce life-cycle emissions of greenhouse gases associated with production and refining of crude oil in the state, including direct reductions in process emissions and reductions in the volume of production or refining of particular types of crude oil.(c) On or before January 1, 2021, and annually thereafter, all operators that have received authorization from the Geologic Energy Management Division in the Department of Conservation to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, shall deliver to the state board a multicut assay for each oil field in which such activity has been authorized, or for each production pool in such field to the extent the state board determines that variations in crude characteristics may exist within a production field sufficient to affect the life-cycle emissions analysis to be prepared pursuant to subdivision (b). Operators shall further deliver to the state board any additional multicut assays that the state board determines are necessary.(d) Beginning January 1, 2021, the owner or operator of a refinery, as defined in Section 25128 of the Public Resources Code, shall deliver to the state board an annual report that shall include both of the following:(1) The volume of each crude oil identified by trade name, and each blend that includes such oil, processed at the refinery during the reporting period.(2) A multicut assay for each crude oil or blend reported pursuant to paragraph (1) that was produced in whole or part outside the state.(e) The state board shall promptly post all multicut assays received pursuant to subdivision (c) or (d) on its internet website.(f) The state board shall provide opportunities for public participation in development of the life-cycle emissions analysis required pursuant to subdivision (b) and shall make a draft of the completed analysis available for public comment. Upon the release of the draft life-cycle emissions analysis, the state board shall make available to the public all supporting data to the extent release of the data is not prohibited by law.
5757
5858
5959
6060 39735. (a) For purposes of this section, the following definitions shall apply:
6161
6262 (1) Life-cycle emissions means all emissions associated with production, processing, refining, shipping, petroleum product transportation, end uses, and disposal of a crude oil and its associated gas, all derivative products, and wastes.
6363
6464 (2) Multicut assay means determination by a qualified laboratory of both of the following:
6565
6666 (A) The characteristics of a crude oil type, including gravity, density, chemical content, including sulfur, nitrogen, and hydrogen, volume and mass flow, microcarbon or Conradson carbon residue, and viscosity for vacuum residuum. Each of these parameters shall be assessed at a range of cut temperatures that shall include at minimum the following nine set points in degrees Centigrade: 80, 180, 290, 343, 399, 454, 525, 525 plus, and 399 plus, where plus indicates the highest temperature at which 100 percent of the crude oil has been distilled.
6767
6868 (B) Levels of benzene, nickel, vanadium, selenium, acidity, viscosity, mercury, microcarbon or Conradson carbon residue, and any other crude oil characteristics or constituents that the state board identifies as pertinent to protection of health, safety, or the environment, assessed on the whole crude.
6969
7070 (b) No later than December 31, 2023, the state board, in cooperation with the Geologic Energy Management Division in the Department of Conservation and the State Energy Resources Conservation and Development Commission, shall complete and publish an analysis of the life-cycle greenhouse gas emissions associated with crude oil produced in the state. The analysis shall include the following elements and any other elements deemed appropriate and necessary by the state board:
7171
7272 (1) Quantification of the per-barrel life-cycle emissions of greenhouse gases, as defined in Section 38505 of the Health and Safety Code, from each of the crude oil types produced in California.
7373
7474 (A) The analysis shall separately identify the life-cycle emissions of greenhouse gases associated with each crude oil production field in California, or with each production pool in any such field to the extent the state board determines necessary pursuant to subdivision (c) to address variations in crude oil characteristics within a production field.
7575
7676 (B) The analysis shall employ a methodology that considers the characteristics of the crude oil from each assessed production field or pool, as reflected in the multicut assays referenced in subdivision (c) of this section and any other relevant information.
7777
7878 (2) Identification of data gaps in the life cycle analysis.
7979
8080 (3) Assessment of the social costs, as defined in Section 38506, of the life-cycle emissions of greenhouse gases associated with each assessed production field or pool.
8181
8282 (4) Criteria that may be used to establish thresholds of significance that could be applied in a determination of significance pursuant to Section 21082.2 of the Public Resources Code for life-cycle greenhouse gas impacts of emissions associated with oil production and refining in California. In determining these criteria, the state board shall consider all of the following:
8383
8484 (A) The cumulative greenhouse gas impacts of crude oil production and refining in the state.
8585
8686 (B) State, local, national, and international greenhouse gas reduction targets.
8787
8888 (C) The social costs of greenhouse gases as determined pursuant to paragraph (3).
8989
9090 (D) Other factors the state board finds appropriate.
9191
9292 (5) Identification of means to reduce life-cycle emissions of greenhouse gases associated with production and refining of crude oil in the state, including direct reductions in process emissions and reductions in the volume of production or refining of particular types of crude oil.
9393
9494 (c) On or before January 1, 2021, and annually thereafter, all operators that have received authorization from the Geologic Energy Management Division in the Department of Conservation to drill, redrill, deepen, or rework a crude oil production well within the state, where the well remains in operation, shall deliver to the state board a multicut assay for each oil field in which such activity has been authorized, or for each production pool in such field to the extent the state board determines that variations in crude characteristics may exist within a production field sufficient to affect the life-cycle emissions analysis to be prepared pursuant to subdivision (b). Operators shall further deliver to the state board any additional multicut assays that the state board determines are necessary.
9595
9696 (d) Beginning January 1, 2021, the owner or operator of a refinery, as defined in Section 25128 of the Public Resources Code, shall deliver to the state board an annual report that shall include both of the following:
9797
9898 (1) The volume of each crude oil identified by trade name, and each blend that includes such oil, processed at the refinery during the reporting period.
9999
100100 (2) A multicut assay for each crude oil or blend reported pursuant to paragraph (1) that was produced in whole or part outside the state.
101101
102102 (e) The state board shall promptly post all multicut assays received pursuant to subdivision (c) or (d) on its internet website.
103103
104104 (f) The state board shall provide opportunities for public participation in development of the life-cycle emissions analysis required pursuant to subdivision (b) and shall make a draft of the completed analysis available for public comment. Upon the release of the draft life-cycle emissions analysis, the state board shall make available to the public all supporting data to the extent release of the data is not prohibited by law.