California 2021-2022 Regular Session

California Assembly Bill AB1869 Compare Versions

Only one version of the bill is available at this time.
OldNewDifferences
11 CALIFORNIA LEGISLATURE 20212022 REGULAR SESSION Assembly Bill No. 1869Introduced by Assembly Member RodriguezFebruary 08, 2022 An act to amend Sections 23920 and 29180 of the Penal Code, relating to firearms. LEGISLATIVE COUNSEL'S DIGESTAB 1869, as introduced, Rodriguez. Firearms: unserialized firearms.Existing federal law requires a commercially produced firearm to be etched or otherwise inscribed by the manufacturer with a unique serial number. Existing state law prohibits the alteration, removal, or obliteration of that serial number. A violation of this prohibition is punishable as a felony. Existing law also prohibits the transfer or possession of a firearm with a serial number that has been altered, removed, or obliterated. A violation of this prohibition is punishable as a misdemeanor.Existing law requires a person, other than a licensed manufacturer, who assembles or manufactures a firearm, or any person who possesses an unserialized firearm, to obtain a unique serial number from the Department of Justice and to inscribe that serial number on the firearm, as specified. A violation of this requirement is punishable as a misdemeanor.This bill would make the possession of an unserialized firearm or possession of a firearm with an altered, removed, or obliterated serial number punishable as a felony. By increasing the punishment for these crimes, this bill would impose a state-mandated local program.The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.This bill would provide that no reimbursement is required by this act for a specified reason.Digest Key Vote: MAJORITY Appropriation: NO Fiscal Committee: YES Local Program: YES Bill TextThe people of the State of California do enact as follows:SECTION 1. Section 23920 of the Penal Code is amended to read:23920. Except as provided in Section 23925, any person who, with knowledge of any change, alteration, removal, or obliteration described in this section, buys, receives, disposes of, sells, offers for sale, or has in possession any pistol, revolver, or other firearm that has had the name of the maker or model, or the manufacturers number or other mark of identification, including any distinguishing number or mark assigned by the Department of Justice, changed, altered, removed, or obliterated, is guilty of a misdemeanor. felony punishable by imprisonment pursuant to subdivision (h) of Section 1170.SEC. 2. Section 29180 of the Penal Code is amended to read:29180. (a) For purposes of this chapter, manufacturing or assembling a firearm means to fabricate or construct a firearm, or to fit together the component parts of a firearm to construct a firearm.(b) Commencing July 1, 2018, prior to manufacturing or assembling a firearm, a person manufacturing or assembling the firearm shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) (A) Within 10 days of manufacturing or assembling a firearm in accordance with paragraph (1), the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(B) If the firearm is manufactured or assembled from polymer plastic, 3.7 ounces of material type 17-4 PH stainless steel shall be embedded within the plastic upon fabrication or construction with the unique serial number engraved or otherwise permanently affixed in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department, and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(c) By January 1, 2019, any person who, as of July 1, 2018, owns a firearm that does not bear a serial number assigned to it pursuant to either Section 23910 or Chapter 44 (commencing with Section 921) of Part 1 of Title 18 of the United States Code and the regulations issued pursuant thereto, shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) Within 10 days of receiving a unique serial number or other mark of identification from the department, the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in accordance with regulations prescribed by the department pursuant to Section 29182 and in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(d) (1) The sale or transfer of ownership of a firearm manufactured or assembled pursuant to this section is prohibited.(2) Paragraph (1) does not apply to the transfer, surrender, or sale of a firearm to a law enforcement agency.(3) Any firearms confiscated by law enforcement that do not bear an engraved serial number or other mark of identification pursuant to subdivision (b) or (c), or a firearm surrendered, transferred, or sold to a law enforcement agency pursuant to paragraph (2) shall be destroyed as provided in Section 18005.(4) Sections 26500 and 27545, and subdivision (a) of Section 31615, do not apply to the transfer, sale, or surrender of firearms to a law enforcement agency pursuant to paragraph (2).(e) A new resident to the state shall apply for a unique serial number or other mark of identification pursuant to Section 29182 within 60 days of arrival for any firearm the resident wishes to possess in the state that the resident previously manufactured or assembled or a firearm the resident owns, that does not have a unique serial number or other mark of identification.(f) A person, corporation, or firm shall not knowingly allow, facilitate, aid, or abet the manufacture or assembling of a firearm pursuant to this section by a person who is within any of the classes identified by Chapter 2 (commencing with Section 29800) or Chapter 3 (commencing with Section 29900) of Division 9 of this code, or Section 8100 or 8103 of the Welfare and Institutions Code.(g) If the firearm is a handgun, a A violation of this section is punishable by imprisonment in a county jail not to exceed one year, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. For all other firearms, a violation of this section is punishable by imprisonment in a county jail not to exceed six months, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. pursuant to subdivision (h) of Section 1170. Each firearm found to be in violation of this section constitutes a distinct and separate offense. This section does not preclude prosecution under any other law providing for a greater penalty.SEC. 3. No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
22
33 CALIFORNIA LEGISLATURE 20212022 REGULAR SESSION Assembly Bill No. 1869Introduced by Assembly Member RodriguezFebruary 08, 2022 An act to amend Sections 23920 and 29180 of the Penal Code, relating to firearms. LEGISLATIVE COUNSEL'S DIGESTAB 1869, as introduced, Rodriguez. Firearms: unserialized firearms.Existing federal law requires a commercially produced firearm to be etched or otherwise inscribed by the manufacturer with a unique serial number. Existing state law prohibits the alteration, removal, or obliteration of that serial number. A violation of this prohibition is punishable as a felony. Existing law also prohibits the transfer or possession of a firearm with a serial number that has been altered, removed, or obliterated. A violation of this prohibition is punishable as a misdemeanor.Existing law requires a person, other than a licensed manufacturer, who assembles or manufactures a firearm, or any person who possesses an unserialized firearm, to obtain a unique serial number from the Department of Justice and to inscribe that serial number on the firearm, as specified. A violation of this requirement is punishable as a misdemeanor.This bill would make the possession of an unserialized firearm or possession of a firearm with an altered, removed, or obliterated serial number punishable as a felony. By increasing the punishment for these crimes, this bill would impose a state-mandated local program.The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.This bill would provide that no reimbursement is required by this act for a specified reason.Digest Key Vote: MAJORITY Appropriation: NO Fiscal Committee: YES Local Program: YES
44
55
66
77
88
99 CALIFORNIA LEGISLATURE 20212022 REGULAR SESSION
1010
1111 Assembly Bill
1212
1313 No. 1869
1414
1515 Introduced by Assembly Member RodriguezFebruary 08, 2022
1616
1717 Introduced by Assembly Member Rodriguez
1818 February 08, 2022
1919
2020 An act to amend Sections 23920 and 29180 of the Penal Code, relating to firearms.
2121
2222 LEGISLATIVE COUNSEL'S DIGEST
2323
2424 ## LEGISLATIVE COUNSEL'S DIGEST
2525
2626 AB 1869, as introduced, Rodriguez. Firearms: unserialized firearms.
2727
2828 Existing federal law requires a commercially produced firearm to be etched or otherwise inscribed by the manufacturer with a unique serial number. Existing state law prohibits the alteration, removal, or obliteration of that serial number. A violation of this prohibition is punishable as a felony. Existing law also prohibits the transfer or possession of a firearm with a serial number that has been altered, removed, or obliterated. A violation of this prohibition is punishable as a misdemeanor.Existing law requires a person, other than a licensed manufacturer, who assembles or manufactures a firearm, or any person who possesses an unserialized firearm, to obtain a unique serial number from the Department of Justice and to inscribe that serial number on the firearm, as specified. A violation of this requirement is punishable as a misdemeanor.This bill would make the possession of an unserialized firearm or possession of a firearm with an altered, removed, or obliterated serial number punishable as a felony. By increasing the punishment for these crimes, this bill would impose a state-mandated local program.The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.This bill would provide that no reimbursement is required by this act for a specified reason.
2929
3030 Existing federal law requires a commercially produced firearm to be etched or otherwise inscribed by the manufacturer with a unique serial number. Existing state law prohibits the alteration, removal, or obliteration of that serial number. A violation of this prohibition is punishable as a felony. Existing law also prohibits the transfer or possession of a firearm with a serial number that has been altered, removed, or obliterated. A violation of this prohibition is punishable as a misdemeanor.
3131
3232 Existing law requires a person, other than a licensed manufacturer, who assembles or manufactures a firearm, or any person who possesses an unserialized firearm, to obtain a unique serial number from the Department of Justice and to inscribe that serial number on the firearm, as specified. A violation of this requirement is punishable as a misdemeanor.
3333
3434 This bill would make the possession of an unserialized firearm or possession of a firearm with an altered, removed, or obliterated serial number punishable as a felony. By increasing the punishment for these crimes, this bill would impose a state-mandated local program.
3535
3636 The California Constitution requires the state to reimburse local agencies and school districts for certain costs mandated by the state. Statutory provisions establish procedures for making that reimbursement.
3737
3838 This bill would provide that no reimbursement is required by this act for a specified reason.
3939
4040 ## Digest Key
4141
4242 ## Bill Text
4343
4444 The people of the State of California do enact as follows:SECTION 1. Section 23920 of the Penal Code is amended to read:23920. Except as provided in Section 23925, any person who, with knowledge of any change, alteration, removal, or obliteration described in this section, buys, receives, disposes of, sells, offers for sale, or has in possession any pistol, revolver, or other firearm that has had the name of the maker or model, or the manufacturers number or other mark of identification, including any distinguishing number or mark assigned by the Department of Justice, changed, altered, removed, or obliterated, is guilty of a misdemeanor. felony punishable by imprisonment pursuant to subdivision (h) of Section 1170.SEC. 2. Section 29180 of the Penal Code is amended to read:29180. (a) For purposes of this chapter, manufacturing or assembling a firearm means to fabricate or construct a firearm, or to fit together the component parts of a firearm to construct a firearm.(b) Commencing July 1, 2018, prior to manufacturing or assembling a firearm, a person manufacturing or assembling the firearm shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) (A) Within 10 days of manufacturing or assembling a firearm in accordance with paragraph (1), the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(B) If the firearm is manufactured or assembled from polymer plastic, 3.7 ounces of material type 17-4 PH stainless steel shall be embedded within the plastic upon fabrication or construction with the unique serial number engraved or otherwise permanently affixed in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department, and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(c) By January 1, 2019, any person who, as of July 1, 2018, owns a firearm that does not bear a serial number assigned to it pursuant to either Section 23910 or Chapter 44 (commencing with Section 921) of Part 1 of Title 18 of the United States Code and the regulations issued pursuant thereto, shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) Within 10 days of receiving a unique serial number or other mark of identification from the department, the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in accordance with regulations prescribed by the department pursuant to Section 29182 and in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(d) (1) The sale or transfer of ownership of a firearm manufactured or assembled pursuant to this section is prohibited.(2) Paragraph (1) does not apply to the transfer, surrender, or sale of a firearm to a law enforcement agency.(3) Any firearms confiscated by law enforcement that do not bear an engraved serial number or other mark of identification pursuant to subdivision (b) or (c), or a firearm surrendered, transferred, or sold to a law enforcement agency pursuant to paragraph (2) shall be destroyed as provided in Section 18005.(4) Sections 26500 and 27545, and subdivision (a) of Section 31615, do not apply to the transfer, sale, or surrender of firearms to a law enforcement agency pursuant to paragraph (2).(e) A new resident to the state shall apply for a unique serial number or other mark of identification pursuant to Section 29182 within 60 days of arrival for any firearm the resident wishes to possess in the state that the resident previously manufactured or assembled or a firearm the resident owns, that does not have a unique serial number or other mark of identification.(f) A person, corporation, or firm shall not knowingly allow, facilitate, aid, or abet the manufacture or assembling of a firearm pursuant to this section by a person who is within any of the classes identified by Chapter 2 (commencing with Section 29800) or Chapter 3 (commencing with Section 29900) of Division 9 of this code, or Section 8100 or 8103 of the Welfare and Institutions Code.(g) If the firearm is a handgun, a A violation of this section is punishable by imprisonment in a county jail not to exceed one year, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. For all other firearms, a violation of this section is punishable by imprisonment in a county jail not to exceed six months, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. pursuant to subdivision (h) of Section 1170. Each firearm found to be in violation of this section constitutes a distinct and separate offense. This section does not preclude prosecution under any other law providing for a greater penalty.SEC. 3. No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
4545
4646 The people of the State of California do enact as follows:
4747
4848 ## The people of the State of California do enact as follows:
4949
5050 SECTION 1. Section 23920 of the Penal Code is amended to read:23920. Except as provided in Section 23925, any person who, with knowledge of any change, alteration, removal, or obliteration described in this section, buys, receives, disposes of, sells, offers for sale, or has in possession any pistol, revolver, or other firearm that has had the name of the maker or model, or the manufacturers number or other mark of identification, including any distinguishing number or mark assigned by the Department of Justice, changed, altered, removed, or obliterated, is guilty of a misdemeanor. felony punishable by imprisonment pursuant to subdivision (h) of Section 1170.
5151
5252 SECTION 1. Section 23920 of the Penal Code is amended to read:
5353
5454 ### SECTION 1.
5555
5656 23920. Except as provided in Section 23925, any person who, with knowledge of any change, alteration, removal, or obliteration described in this section, buys, receives, disposes of, sells, offers for sale, or has in possession any pistol, revolver, or other firearm that has had the name of the maker or model, or the manufacturers number or other mark of identification, including any distinguishing number or mark assigned by the Department of Justice, changed, altered, removed, or obliterated, is guilty of a misdemeanor. felony punishable by imprisonment pursuant to subdivision (h) of Section 1170.
5757
5858 23920. Except as provided in Section 23925, any person who, with knowledge of any change, alteration, removal, or obliteration described in this section, buys, receives, disposes of, sells, offers for sale, or has in possession any pistol, revolver, or other firearm that has had the name of the maker or model, or the manufacturers number or other mark of identification, including any distinguishing number or mark assigned by the Department of Justice, changed, altered, removed, or obliterated, is guilty of a misdemeanor. felony punishable by imprisonment pursuant to subdivision (h) of Section 1170.
5959
6060 23920. Except as provided in Section 23925, any person who, with knowledge of any change, alteration, removal, or obliteration described in this section, buys, receives, disposes of, sells, offers for sale, or has in possession any pistol, revolver, or other firearm that has had the name of the maker or model, or the manufacturers number or other mark of identification, including any distinguishing number or mark assigned by the Department of Justice, changed, altered, removed, or obliterated, is guilty of a misdemeanor. felony punishable by imprisonment pursuant to subdivision (h) of Section 1170.
6161
6262
6363
6464 23920. Except as provided in Section 23925, any person who, with knowledge of any change, alteration, removal, or obliteration described in this section, buys, receives, disposes of, sells, offers for sale, or has in possession any pistol, revolver, or other firearm that has had the name of the maker or model, or the manufacturers number or other mark of identification, including any distinguishing number or mark assigned by the Department of Justice, changed, altered, removed, or obliterated, is guilty of a misdemeanor. felony punishable by imprisonment pursuant to subdivision (h) of Section 1170.
6565
6666 SEC. 2. Section 29180 of the Penal Code is amended to read:29180. (a) For purposes of this chapter, manufacturing or assembling a firearm means to fabricate or construct a firearm, or to fit together the component parts of a firearm to construct a firearm.(b) Commencing July 1, 2018, prior to manufacturing or assembling a firearm, a person manufacturing or assembling the firearm shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) (A) Within 10 days of manufacturing or assembling a firearm in accordance with paragraph (1), the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(B) If the firearm is manufactured or assembled from polymer plastic, 3.7 ounces of material type 17-4 PH stainless steel shall be embedded within the plastic upon fabrication or construction with the unique serial number engraved or otherwise permanently affixed in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department, and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(c) By January 1, 2019, any person who, as of July 1, 2018, owns a firearm that does not bear a serial number assigned to it pursuant to either Section 23910 or Chapter 44 (commencing with Section 921) of Part 1 of Title 18 of the United States Code and the regulations issued pursuant thereto, shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) Within 10 days of receiving a unique serial number or other mark of identification from the department, the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in accordance with regulations prescribed by the department pursuant to Section 29182 and in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(d) (1) The sale or transfer of ownership of a firearm manufactured or assembled pursuant to this section is prohibited.(2) Paragraph (1) does not apply to the transfer, surrender, or sale of a firearm to a law enforcement agency.(3) Any firearms confiscated by law enforcement that do not bear an engraved serial number or other mark of identification pursuant to subdivision (b) or (c), or a firearm surrendered, transferred, or sold to a law enforcement agency pursuant to paragraph (2) shall be destroyed as provided in Section 18005.(4) Sections 26500 and 27545, and subdivision (a) of Section 31615, do not apply to the transfer, sale, or surrender of firearms to a law enforcement agency pursuant to paragraph (2).(e) A new resident to the state shall apply for a unique serial number or other mark of identification pursuant to Section 29182 within 60 days of arrival for any firearm the resident wishes to possess in the state that the resident previously manufactured or assembled or a firearm the resident owns, that does not have a unique serial number or other mark of identification.(f) A person, corporation, or firm shall not knowingly allow, facilitate, aid, or abet the manufacture or assembling of a firearm pursuant to this section by a person who is within any of the classes identified by Chapter 2 (commencing with Section 29800) or Chapter 3 (commencing with Section 29900) of Division 9 of this code, or Section 8100 or 8103 of the Welfare and Institutions Code.(g) If the firearm is a handgun, a A violation of this section is punishable by imprisonment in a county jail not to exceed one year, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. For all other firearms, a violation of this section is punishable by imprisonment in a county jail not to exceed six months, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. pursuant to subdivision (h) of Section 1170. Each firearm found to be in violation of this section constitutes a distinct and separate offense. This section does not preclude prosecution under any other law providing for a greater penalty.
6767
6868 SEC. 2. Section 29180 of the Penal Code is amended to read:
6969
7070 ### SEC. 2.
7171
7272 29180. (a) For purposes of this chapter, manufacturing or assembling a firearm means to fabricate or construct a firearm, or to fit together the component parts of a firearm to construct a firearm.(b) Commencing July 1, 2018, prior to manufacturing or assembling a firearm, a person manufacturing or assembling the firearm shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) (A) Within 10 days of manufacturing or assembling a firearm in accordance with paragraph (1), the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(B) If the firearm is manufactured or assembled from polymer plastic, 3.7 ounces of material type 17-4 PH stainless steel shall be embedded within the plastic upon fabrication or construction with the unique serial number engraved or otherwise permanently affixed in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department, and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(c) By January 1, 2019, any person who, as of July 1, 2018, owns a firearm that does not bear a serial number assigned to it pursuant to either Section 23910 or Chapter 44 (commencing with Section 921) of Part 1 of Title 18 of the United States Code and the regulations issued pursuant thereto, shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) Within 10 days of receiving a unique serial number or other mark of identification from the department, the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in accordance with regulations prescribed by the department pursuant to Section 29182 and in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(d) (1) The sale or transfer of ownership of a firearm manufactured or assembled pursuant to this section is prohibited.(2) Paragraph (1) does not apply to the transfer, surrender, or sale of a firearm to a law enforcement agency.(3) Any firearms confiscated by law enforcement that do not bear an engraved serial number or other mark of identification pursuant to subdivision (b) or (c), or a firearm surrendered, transferred, or sold to a law enforcement agency pursuant to paragraph (2) shall be destroyed as provided in Section 18005.(4) Sections 26500 and 27545, and subdivision (a) of Section 31615, do not apply to the transfer, sale, or surrender of firearms to a law enforcement agency pursuant to paragraph (2).(e) A new resident to the state shall apply for a unique serial number or other mark of identification pursuant to Section 29182 within 60 days of arrival for any firearm the resident wishes to possess in the state that the resident previously manufactured or assembled or a firearm the resident owns, that does not have a unique serial number or other mark of identification.(f) A person, corporation, or firm shall not knowingly allow, facilitate, aid, or abet the manufacture or assembling of a firearm pursuant to this section by a person who is within any of the classes identified by Chapter 2 (commencing with Section 29800) or Chapter 3 (commencing with Section 29900) of Division 9 of this code, or Section 8100 or 8103 of the Welfare and Institutions Code.(g) If the firearm is a handgun, a A violation of this section is punishable by imprisonment in a county jail not to exceed one year, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. For all other firearms, a violation of this section is punishable by imprisonment in a county jail not to exceed six months, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. pursuant to subdivision (h) of Section 1170. Each firearm found to be in violation of this section constitutes a distinct and separate offense. This section does not preclude prosecution under any other law providing for a greater penalty.
7373
7474 29180. (a) For purposes of this chapter, manufacturing or assembling a firearm means to fabricate or construct a firearm, or to fit together the component parts of a firearm to construct a firearm.(b) Commencing July 1, 2018, prior to manufacturing or assembling a firearm, a person manufacturing or assembling the firearm shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) (A) Within 10 days of manufacturing or assembling a firearm in accordance with paragraph (1), the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(B) If the firearm is manufactured or assembled from polymer plastic, 3.7 ounces of material type 17-4 PH stainless steel shall be embedded within the plastic upon fabrication or construction with the unique serial number engraved or otherwise permanently affixed in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department, and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(c) By January 1, 2019, any person who, as of July 1, 2018, owns a firearm that does not bear a serial number assigned to it pursuant to either Section 23910 or Chapter 44 (commencing with Section 921) of Part 1 of Title 18 of the United States Code and the regulations issued pursuant thereto, shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) Within 10 days of receiving a unique serial number or other mark of identification from the department, the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in accordance with regulations prescribed by the department pursuant to Section 29182 and in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(d) (1) The sale or transfer of ownership of a firearm manufactured or assembled pursuant to this section is prohibited.(2) Paragraph (1) does not apply to the transfer, surrender, or sale of a firearm to a law enforcement agency.(3) Any firearms confiscated by law enforcement that do not bear an engraved serial number or other mark of identification pursuant to subdivision (b) or (c), or a firearm surrendered, transferred, or sold to a law enforcement agency pursuant to paragraph (2) shall be destroyed as provided in Section 18005.(4) Sections 26500 and 27545, and subdivision (a) of Section 31615, do not apply to the transfer, sale, or surrender of firearms to a law enforcement agency pursuant to paragraph (2).(e) A new resident to the state shall apply for a unique serial number or other mark of identification pursuant to Section 29182 within 60 days of arrival for any firearm the resident wishes to possess in the state that the resident previously manufactured or assembled or a firearm the resident owns, that does not have a unique serial number or other mark of identification.(f) A person, corporation, or firm shall not knowingly allow, facilitate, aid, or abet the manufacture or assembling of a firearm pursuant to this section by a person who is within any of the classes identified by Chapter 2 (commencing with Section 29800) or Chapter 3 (commencing with Section 29900) of Division 9 of this code, or Section 8100 or 8103 of the Welfare and Institutions Code.(g) If the firearm is a handgun, a A violation of this section is punishable by imprisonment in a county jail not to exceed one year, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. For all other firearms, a violation of this section is punishable by imprisonment in a county jail not to exceed six months, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. pursuant to subdivision (h) of Section 1170. Each firearm found to be in violation of this section constitutes a distinct and separate offense. This section does not preclude prosecution under any other law providing for a greater penalty.
7575
7676 29180. (a) For purposes of this chapter, manufacturing or assembling a firearm means to fabricate or construct a firearm, or to fit together the component parts of a firearm to construct a firearm.(b) Commencing July 1, 2018, prior to manufacturing or assembling a firearm, a person manufacturing or assembling the firearm shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) (A) Within 10 days of manufacturing or assembling a firearm in accordance with paragraph (1), the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(B) If the firearm is manufactured or assembled from polymer plastic, 3.7 ounces of material type 17-4 PH stainless steel shall be embedded within the plastic upon fabrication or construction with the unique serial number engraved or otherwise permanently affixed in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department, and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(c) By January 1, 2019, any person who, as of July 1, 2018, owns a firearm that does not bear a serial number assigned to it pursuant to either Section 23910 or Chapter 44 (commencing with Section 921) of Part 1 of Title 18 of the United States Code and the regulations issued pursuant thereto, shall do all of the following:(1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.(2) Within 10 days of receiving a unique serial number or other mark of identification from the department, the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in accordance with regulations prescribed by the department pursuant to Section 29182 and in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.(3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.(d) (1) The sale or transfer of ownership of a firearm manufactured or assembled pursuant to this section is prohibited.(2) Paragraph (1) does not apply to the transfer, surrender, or sale of a firearm to a law enforcement agency.(3) Any firearms confiscated by law enforcement that do not bear an engraved serial number or other mark of identification pursuant to subdivision (b) or (c), or a firearm surrendered, transferred, or sold to a law enforcement agency pursuant to paragraph (2) shall be destroyed as provided in Section 18005.(4) Sections 26500 and 27545, and subdivision (a) of Section 31615, do not apply to the transfer, sale, or surrender of firearms to a law enforcement agency pursuant to paragraph (2).(e) A new resident to the state shall apply for a unique serial number or other mark of identification pursuant to Section 29182 within 60 days of arrival for any firearm the resident wishes to possess in the state that the resident previously manufactured or assembled or a firearm the resident owns, that does not have a unique serial number or other mark of identification.(f) A person, corporation, or firm shall not knowingly allow, facilitate, aid, or abet the manufacture or assembling of a firearm pursuant to this section by a person who is within any of the classes identified by Chapter 2 (commencing with Section 29800) or Chapter 3 (commencing with Section 29900) of Division 9 of this code, or Section 8100 or 8103 of the Welfare and Institutions Code.(g) If the firearm is a handgun, a A violation of this section is punishable by imprisonment in a county jail not to exceed one year, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. For all other firearms, a violation of this section is punishable by imprisonment in a county jail not to exceed six months, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. pursuant to subdivision (h) of Section 1170. Each firearm found to be in violation of this section constitutes a distinct and separate offense. This section does not preclude prosecution under any other law providing for a greater penalty.
7777
7878
7979
8080 29180. (a) For purposes of this chapter, manufacturing or assembling a firearm means to fabricate or construct a firearm, or to fit together the component parts of a firearm to construct a firearm.
8181
8282 (b) Commencing July 1, 2018, prior to manufacturing or assembling a firearm, a person manufacturing or assembling the firearm shall do all of the following:
8383
8484 (1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.
8585
8686 (2) (A) Within 10 days of manufacturing or assembling a firearm in accordance with paragraph (1), the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.
8787
8888 (B) If the firearm is manufactured or assembled from polymer plastic, 3.7 ounces of material type 17-4 PH stainless steel shall be embedded within the plastic upon fabrication or construction with the unique serial number engraved or otherwise permanently affixed in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.
8989
9090 (3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department, and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.
9191
9292 (c) By January 1, 2019, any person who, as of July 1, 2018, owns a firearm that does not bear a serial number assigned to it pursuant to either Section 23910 or Chapter 44 (commencing with Section 921) of Part 1 of Title 18 of the United States Code and the regulations issued pursuant thereto, shall do all of the following:
9393
9494 (1) Apply to the Department of Justice for a unique serial number or other mark of identification pursuant to Section 29182.
9595
9696 (2) Within 10 days of receiving a unique serial number or other mark of identification from the department, the unique serial number or other mark of identification provided by the department shall be engraved or permanently affixed to the firearm in accordance with regulations prescribed by the department pursuant to Section 29182 and in a manner that meets or exceeds the requirements imposed on licensed importers and licensed manufacturers of firearms pursuant to subsection (i) of Section 923 of Title 18 of the United States Code and regulations issued pursuant thereto.
9797
9898 (3) After the serial number provided by the department is engraved or otherwise permanently affixed to the firearm, the person shall notify the department of that fact in a manner and within a time period specified by the department and with sufficient information to identify the owner of the firearm, the unique serial number or mark of identification provided by the department, and the firearm in a manner prescribed by the department.
9999
100100 (d) (1) The sale or transfer of ownership of a firearm manufactured or assembled pursuant to this section is prohibited.
101101
102102 (2) Paragraph (1) does not apply to the transfer, surrender, or sale of a firearm to a law enforcement agency.
103103
104104 (3) Any firearms confiscated by law enforcement that do not bear an engraved serial number or other mark of identification pursuant to subdivision (b) or (c), or a firearm surrendered, transferred, or sold to a law enforcement agency pursuant to paragraph (2) shall be destroyed as provided in Section 18005.
105105
106106 (4) Sections 26500 and 27545, and subdivision (a) of Section 31615, do not apply to the transfer, sale, or surrender of firearms to a law enforcement agency pursuant to paragraph (2).
107107
108108 (e) A new resident to the state shall apply for a unique serial number or other mark of identification pursuant to Section 29182 within 60 days of arrival for any firearm the resident wishes to possess in the state that the resident previously manufactured or assembled or a firearm the resident owns, that does not have a unique serial number or other mark of identification.
109109
110110 (f) A person, corporation, or firm shall not knowingly allow, facilitate, aid, or abet the manufacture or assembling of a firearm pursuant to this section by a person who is within any of the classes identified by Chapter 2 (commencing with Section 29800) or Chapter 3 (commencing with Section 29900) of Division 9 of this code, or Section 8100 or 8103 of the Welfare and Institutions Code.
111111
112112 (g) If the firearm is a handgun, a A violation of this section is punishable by imprisonment in a county jail not to exceed one year, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. For all other firearms, a violation of this section is punishable by imprisonment in a county jail not to exceed six months, or by a fine not to exceed one thousand dollars ($1,000), or by both that fine and imprisonment. pursuant to subdivision (h) of Section 1170. Each firearm found to be in violation of this section constitutes a distinct and separate offense. This section does not preclude prosecution under any other law providing for a greater penalty.
113113
114114 SEC. 3. No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
115115
116116 SEC. 3. No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
117117
118118 SEC. 3. No reimbursement is required by this act pursuant to Section 6 of Article XIIIB of the California Constitution because the only costs that may be incurred by a local agency or school district will be incurred because this act creates a new crime or infraction, eliminates a crime or infraction, or changes the penalty for a crime or infraction, within the meaning of Section 17556 of the Government Code, or changes the definition of a crime within the meaning of Section 6 of Article XIIIB of the California Constitution.
119119
120120 ### SEC. 3.