LRB-5470/1
MCP:emw
2023 - 2024 LEGISLATURE
2023 ASSEMBLY BILL 958
January 16, 2024 - Introduced by Representatives MURSAU and O'CONNOR,
cosponsored by Senators COWLES, AGARD, JAMES, WANGGAARD and SPREITZER.
Referred to Committee on Environment.
***AUTHORS SUBJECT TO CHANGE***
AN ACT to repeal 287.17 (10) (c) 1. a.; to renumber and amend 287.17 (4) (d)
1.; to amend 287.17 (1) (j), 287.17 (4) (b) 1., 287.17 (4) (b) 2., 287.17 (5) (a) 1.
a., 287.17 (5) (a) 1. b., 287.17 (5) (a) 1. c. and 287.17 (10) (c) 2.; and to create
287.17 (4) (d) 1. b. and 287.17 (4) (g) 3. of the statutes; relating to: changes to
the electronic waste recycling program and granting rule-making authority.
Analysis by the Legislative Reference Bureau
This bill makes changes to the electronic waste recycling program, known as
E-Cycle Wisconsin, which is administered by the Department of Natural Resources.
Manufacturer target recycling weights
Under the existing program, a manufacturer may not sell certain consumer
electronic devices to households or covered schools in this state unless the
manufacturer registers with DNR each year, pays a registration fee, and either
recycles a certain amount of electronics or pays a shortfall fee. Currently, a
manufacturer's recycling target for any given year is 80 percent of the weight of
electronics that the manufacturer sold to households or covered schools in this state
during the year that began three years before the beginning of the year in which the
calculation is made.
Under the bill, DNR must calculate each manufacturer's target recycling
weight for the upcoming year and notify each manufacturer of its target by the
August 1 prior to the year in which the target will apply. Under the bill, DNR must
1
2
3
4
5 - 2 -2023 - 2024 Legislature LRB-5470/1
MCP:emw
ASSEMBLY BILL 958
first determine a manufacturer's market share percentage by dividing the weight of
electronic devices the manufacturer sold to households or covered schools in this
state during the previous year (the year that began two years before the beginning
of the year in which the target recycling weight will apply) by the total weight of all
manufacturers' covered electronic devices sold to households or covered schools in
this state during the same program year. DNR then multiplies this percentage by
the total weight of electronic devices collected in this state by recyclers during the
previous year (the year that began two years before the beginning of the year in
which the target recycling weight will apply).
Manufacturer reporting
Currently, a manufacturer must annually report to DNR the total weight of all
of its electronic devices sold to households or covered schools in this state during the
year that began two years before the beginning of the year in which the report is
made. The bill changes this to require reporting of this weight from the previous
year.
Eligible electronic devices
Under current law, only eligible electronic devices that are collected by a
recycler may be counted towards a manufacturer's target recycling weight. “Eligible
electronic device” is defined to include devices such as consumer computers,
consumer video display devices, and peripherals. “Peripheral” is defined to mean
devices that are sold for external use with a consumer computer and that provide
input into or output from a consumer computer.
This bill changes the definition of a “peripheral” to include devices that are sold
for external use with a consumer video display device and that provide input into or
output from a consumer video display device. The bill therefore includes these
devices in the definition of “eligible electronic device.”
Good faith progress toward a target recycling weight
Current law provides that, if a manufacturer makes a good faith effort towards
meeting its target recycling weight in a given year, but does not meet its target, DNR
may waive the requirement for the manufacturer to pay a shortfall fee for that year.
The bill requires DNR to promulgates rules establishing what constitutes good
faith in this context.
Manufacturer fees
Under current law, a manufacturer's annual registration fee is $5,000 if it sold
at least 500 covered electronic devices (consumer video display devices, consumer
computers, or consumer printers) in this state during the previous year and $1,250
if the manufacturer sold at least 250 but fewer than 500 covered electronic devices.
Under the bill, a manufacturer's annual registration fee is $5,500 if it sold at
least 550 covered electronic devices in this state during the previous year and $2,500
if the manufacturer sold at least 250 but fewer than 550 covered electronic devices.
Under current law, which is unchanged under the bill, manufacturers that sell fewer
than 250 devices in a year do not pay a registration fee. - 3 -2023 - 2024 Legislature
LRB-5470/1
MCP:emw
ASSEMBLY BILL 958
For further information see the state fiscal estimate, which will be printed as
an appendix to this bill.
The people of the state of Wisconsin, represented in senate and assembly, do
enact as follows:
SECTION 1. 287.17 (1) (j) of the statutes is amended to read:
287.17 (1) (j) “Peripheral" means a keyboard or any other device, other than
a consumer printer, that is sold exclusively for external use with a consumer
computer or consumer video display device and that provides input into or output
from a consumer computer or consumer video display device.
SECTION 2. 287.17 (4) (b) 1. of the statutes is amended to read:
287.17 (4) (b) 1. If the manufacturer sold at least 500 550 covered electronic
devices in this state during the previous program year, the manufacturer shall pay
a registration fee of $5,000 $5,500, except as provided under sub. (10) (k).
SECTION 3. 287.17 (4) (b) 2. of the statutes is amended to read:
287.17 (4) (b) 2. If the manufacturer sold at least 250 but fewer than 500 549
covered electronic devices in this state during the previous program year, the
manufacturer shall pay a registration fee of $1,250 $2,500, except as provided under
sub. (10) (k).
SECTION 4. 287.17 (4) (d) 1. of the statutes is renumbered 287.17 (4) (d) 1.
(intro.) and amended to read:
287.17 (4) (d) 1. (intro.) Determine the manufacturer's target recycling weight
by multiplying. The department shall calculate the target recycling weight for each
manufacturer for the upcoming program year and shall report a manufacturer's
target recycling weight to the manufacturer no later than the August 1 preceding the
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 - 4 -2023 - 2024 Legislature LRB-5470/1
MCP:emw
SECTION 4 ASSEMBLY BILL 958
program year in which the target recycling weight will apply. The department shall
calculate a manufacturer's target recycling weight as follows:
a. Divide the number of pounds of the manufacturer's covered electronic
devices sold to households or covered schools in this state during the program year
that began 3 2 program years before the beginning of the program year in which the
calculation is made target recycling weight will apply, as reported under sub. (5) (a),
by 0.8 the total weight of all manufacturers' covered electronic devices sold to
households or covered schools in this state during the same program year. The
quotient, rounded to the nearest one-hundredth, shall be the manufacturer's market
share percentage.
SECTION 5. 287.17 (4) (d) 1. b. of the statutes is created to read:
287.17 (4) (d) 1. b. Multiply the manufacturer's market share percentage, as
calculated under subd. 1. a., by the total weight of eligible electronic devices collected
in this state by recyclers during the program year that began 2 program years before
the beginning of the program year in which the target recycling weight will apply,
as reported under sub. (8) (b) 1. The product, rounded to the nearest whole number,
shall be the manufacturer's target recycling weight for the upcoming program year.
SECTION 6. 287.17 (4) (g) 3. of the statutes is created to read:
287.17 (4) (g) 3. The department shall establish by rule what may constitute
good faith progress toward meeting a target recycling weight under this paragraph.
The rule shall provide flexibility in staff determination of good faith progress, but
shall establish means by which good faith progress may be demonstrated, and shall
account for circumstances beyond a manufacturer's control such as a reduction in
collection sites or events due to a local or statewide declared emergency.
SECTION 7. 287.17 (5) (a) 1. a. of the statutes is amended to read:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25 - 5 -2023 - 2024 Legislature
LRB-5470/1
MCP:emw
SECTION 7
ASSEMBLY BILL 958
287.17 (5) (a) 1. a. The total weight of each model of its covered electronic
devices sold to households or covered schools in this state during the previous
program year that began 2 program years before the beginning of the program year
in which the report is made.
SECTION 8. 287.17 (5) (a) 1. b. of the statutes is amended to read:
287.17 (5) (a) 1. b. The total weight of all of its covered electronic devices sold
to households or covered schools in this state during the previous program year that
began 2 program years before the beginning of the program year in which the report
is made.
SECTION 9. 287.17 (5) (a) 1. c. of the statutes is amended to read:
287.17 (5) (a) 1. c. An estimate, based on national sales data, of the total weight
of its covered electronic devices sold to households or covered schools in this state
during the previous program year that began 2 program years before the beginning
of the program year in which the report is made.
SECTION 10. 287.17 (10) (c) 1. a. of the statutes is repealed.
SECTION 11. 287.17 (10) (c) 2. of the statutes is amended to read:
287.17 (10) (c) 2. If the department determines that any of the values under
subd. 1. a. b. to d. should be changed in order to improve the effectiveness of the
program under this section or to provide more recycling opportunities to rural areas
of this state, the department shall report its recommendations for changes under s.
13.172 (3) to the committee of each house of the legislature with jurisdiction over
solid waste policy.
SECTION 12.0Nonstatutory provisions.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23 - 6 -2023 - 2024 Legislature LRB-5470/1
MCP:emw
SECTION 12 ASSEMBLY BILL 958
(1) RECYCLING TARGETS FOR PROGRAM YEAR 2024. Notwithstanding s. 287.17 (4)
(d) 1., a manufacturer's target recycling weight for program year 2024 shall be
determined as follows:
(a) Divide the number of pounds of the manufacturer's covered electronic
devices sold to households or covered schools in this state during program year
2021-22, as reported under s. 287.17 (5) (a), by the total weight of all manufacturers'
covered electronic devices sold to households or covered schools in this state during
the same program year. The quotient, rounded to the nearest one-hundredth, shall
be the manufacturer's market share percentage.
(b) Multiply the manufacturer's market share percentage, as calculated under
par. (a), by the total weight of eligible electronic devices collected in this state by
recyclers during program year 2021-22, as reported under s. 287.17 (8) (b) 1. The
product, rounded to the nearest whole number, shall be the manufacturer's target
recycling weight for program year 2024.
(2) RECYCLING TARGETS FOR PROGRAM YEAR 2025.
(a) In this subsection, “transition year" has the meaning given in s. 287.17 (1)
(pg).
(b) Notwithstanding s. 287.17 (4) (d) 1., a manufacturer's target recycling
weight for program year 2025 shall be determined as follows:
1. Divide the number of pounds of the manufacturer's covered electronic
devices sold to households or covered schools in this state during the transition year,
as reported under s. 287.17 (5) (a), by the total weight of all manufacturers' covered
electronic devices sold to households or covered schools in this state during the
transition year. The quotient, rounded to the nearest one-hundredth, shall be the
manufacturer's market share percentage.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25 - 7 -2023 - 2024 Legislature
LRB-5470/1
MCP:emw
SECTION 12
ASSEMBLY BILL 958
2. Multiply the manufacturer's market share percentage, as calculated under
subd. 1., by the total weight of eligible electronic devices collected in this state by
recyclers during the transition year, as reported under s. 287.17 (8) (b) 1.
3. Multiply the product under subd. 2. by two-thirds. The product, rounded
to the nearest whole number, shall be the manufacturer's target recycling weight for
program year 2025.
(END)
1
2
3
4
5
6
7